Home > Installation Instructions for Brushed Nickel Shower With Adjustable Body Jets And Mixer-Wall Mount Style

How to Install Brushed Nickel Shower With Adjustable Body Jets And Mixer-Wall Mount Style | BS-BNS100

Turn on the fun in your shower just by turning on the water. Solid stainless steel construction with a brushed nickel finish and a ceramic valve core material for long durability that will upgrade your bathroom with a modern and cool look. The Showerhead and 6 body jet have a rainfall function where you can experience the true feeling of rain. You can install the rain shower head and handheld showerhead and body jets where you like just depend on the position of concealed water pipe.



Features:		Visit Product Page
Brand Name: BathSelect Model Number: BS-BNS100 Type: Shower Set Finish: Brushed Nickel Number of Handles: Triple Handle Mixer Material: Solid Brass Anti-scald Threading Fitting: Fit in any standard shower head Inclusion: Shower arm Installation: Wall Mount Design: Modern Stylish Design Stainless steel finish Showerhead Material: Stainless Steel	shower

Important Note:

Before you begin, please read the installation instructions below. Observe all local building and safety codes.

Unpack and inspect the product for any shipping damages. If you find damages, do not install.

Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.

Shower Head Installation Instructions


Step 1:	shower	installation	Step 2:


Step 3:			Step 4:


Step 5:			Step 6:


Step 7:

No tools required, ½ connector fits standard-sized shower plumbing.

1. Apply plumber's tape to the threads on both ends of the shower arm and slide on the decorative escutcheon.

2. Insert the new arm into the fitting in the ceiling and twist to tighten. Finish tightening with your adjustable wrench. Wrap a dry cloth around the shower arm to protect the finish while tightening with adjustable wrench.

3. Thread the new shower head onto the arm and hand-tighten. Hold the shower arm in place with groove joint pliers and finish tightening the shower head with your adjustable wrench. Wrap both in a dry cloth to protect the finish.

4. Before securing the decorative escutcheon, turn on the water supply to make sure that all connections are tight and there is no leaking. If no leaks are detected, continue with the installation. If leakage does occur, use your adjustable wrench to tighten the connections as necessary.

5. Apply a bead if silicone sealant to the back of the escutcheon and press firmly into place against the installation surface. Wipe away any excess sealant with your damp cloth.