Bronze Finish Round Color Changing LED Waterfall Rain Shower head
Round Color Changing LED Waterfall Rain Shower head Products Specification:
Shower head Length : 20"
Shower head Width " 20"
Material : Stainless Steel
Finish : Oil Rubbed Bronze
Showerhead Style : Contemporary Rain Shower
Mount Method : Ceiling Mount
Connection : 1/2" US standard (included)
Features:
It can be installed as Ceiling Mount.
High tech rain shower head water powered LED lights using a built in hidden dynamo which creates different color of your water shower
The lights will automatically turn on when water is turned on
The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water and light Never be scalded again by entering a shower that is just too hot;
The shower head will automatically change colors according to water temperature so you know how the water will feel by looking at it
The threading is universal so it will fit any standard shower head by simply unscrewing the old one by hand and attaching the new one.
The Oil Rubbed Bronze Shower head can be used with ceiling mount shower arm, which is included.
Modern stylish design finished in Bronze made to match or stand out from your other bathroom fixtures
High quality this modern shower head is made out of Stainless Steel, so its made to last!!
Remarks:
Energy saving, water power no battery, color change with different temperature. Water temperature 32°C, led shower Blue will show between 33°C~41°C, led shower Green will show between 42°C~45°C, led shower Red color will show above 46°C, led shower Red color will flash immediately Water saving led shower-Water flow is less than 9 litters per minute.
|
|
BathSelect® Manufacturer Warranty Information
|
Installation Instructions for Bronze Finish Round Color Changing LED Waterfall Rain Shower head
|
|
1. Ceiling arm mounting plate
2. Olive
3. Locking nut
4. Ceiling trim
5. Ceiling arm
6. Emily fixed showerhead
7. Fixing screws and wall plugs (not shown)
- Remove your existing shower head with a wrench.
- Set the wrench in place and turn the nut to the left to loosen it.
- Have a hand ready to catch the shower head when it falls so that the metal doesn’t crack your shower floor.
- Clean the threads of the base of the shower head steel wool.
- Be sure to remove any debris that had collected around the threads.
- Wrap the threads with Teflon tape, This tape comes with almost all new shower faucets and heads and provides traction for the new hardware.
- Place a rubber “O”-ring inside the new shower head and water connection, this prevents any leaks and improves water pressure.
- Tighten the LED shower head.
- Test the Temperature Controlled Shower Head to make sure there are no leaks and that everything is working properly.
- Now you have a huge improvement in your bathroom for a minimal amount of cost and effort.
|
|
|
