Home > Brushed Nickel Sensor Controlled Automatic Shower Head Installation Instructions

Sensor Controlled Automatic Shower Head Installation Instructions

How to install an automatic shower head

BathSelect Brushed Nickel Sensor Controlled Automatic Shower Head

The shower will automatically shut off after being used for more than 2 minutes. The sensor features a low battery level indicator. Touch-free electronic shower control: The shower is activated automatically when the user steps within the sensor range. No need to have a valve to turn off after bathing. Water-efficient faucet reduces overall water usage without sacrificing water pressure. It is very convenient and clean. Brushed Nickel finished Solid brass construction for reliability and long-lasting performance. Enables users to have a shower without touching the shower control, saves water, prevents cross-contamination and keeps the showers cleaner, especially ideal for spas, hotels, and care homes.

BathSelect Brushed Nickel Sensor Controlled Automatic Shower Head Features:

  • Easy to install and retrofit product
  • Material: Solid all-brass construction
  • 3 products in 1: replace the mixer shower, the thermostatic mixing valve and operates by an infrared sensor
  • Vandal-resistant stopper cup upon request
  • Hidden wall mounting screws for security
  • State-of-the-art design
  • Motion Touchless Operation
  • Sensitive Sensor with Infrared AI Smart-Chip
  • Fit for residential or commercial use applications.
  • Factory set to 30-second Auto Shutoff (can be adjusted).
  • Water Pressure: 0.5 - 7.0 KGS/cm, 10 - 125 psi
  • Solid Brass Construction, Brushed Nickel Finish
  • Easy to Install - Instructions Included
  • Water-resistant solenoid enclosure
  • Advanced energy-saving design for long-lasting battery life
  • Comes complete with Hoses & Accessories
  • Power Supply: AC110V And DC6V (batteries not included)
  • AC/DC power option.
  • ADA Complaint
  • Easily can be installed in new or retrofit applications.
BathSelect Brushed Nickel Sensor Controlled Automatic Shower Head
BathSelect® Manufacturer Warranty Information
  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
  • Please note all showers must be installed by a professional and certified plumber otherwise warranty may be voided
shower shower

Shower Head Installation Instructions

Tools and Materials Required
  • Adjustable Wrench
  • Plumber’s Tape
  • Dry Cloth
  • Screwdriver
  • Silicone Sealant
shower Shower Head
Step 1

Shower Head
Step 2

Shower Head
Step 3

Step 4


  • Use your hands counter clockwise to unscrew the old showerhead and removed it.
  • Take out the showerhead, make sure the shower filter is placed in the connector.
  • Ensure the showerhead full horizontal alignment wall mounted shower arm thread.
  • Use your hands clockwise to tighten showerhead.
  • Insert the long end of the shower arm (2) through the flange (1) and wrap plumbers’ tape around the threaded end of the shower arm (2) in a clockwise direction, as shown. Screw the shower arm into pipe elbow inside of the wall.
  • Install new shower head on shower arm. Thread the ball onto the shower arm clockwise.

BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions