How can a dark basin or countertop influence infrared sensor calibration?

Dark surfaces may return less infrared energy than polished or light-colored materials. The faucet and soap-dispenser detection zones should therefore be validated with the actual basin installed rather than calibrated before final countertop completion.

Why should the water and soap sensor fields remain physically separated?

Distinct detection zones prevent a single hand movement from activating both functions unintentionally. Separation also improves the logical soap-then-water handwashing sequence and reduces unnecessary consumption.

What causes intermittent faucet activation even when electrical power is stable?

Common causes include residue on the infrared lens, reflective objects within the sensing field, loose low-voltage connectors, restricted inlet filtration, or unstable hand positioning near the edge of the calibrated zone.

How does the outlet aerator affect solenoid and user-side performance?

The aerator controls the discharge pattern and limits splash at the basin. Mineral buildup can increase backpressure, distort the stream, and make normal solenoid operation appear hydraulically weak.

Why should the soap line avoid tight bends beneath the deck?

Sharp bends can collapse flexible tubing, increase pump resistance, and cause irregular soap doses. The tube should follow a smooth route from the reservoir to the dispenser with sufficient service clearance.

How should the matte-black finish be cleaned in high-traffic facilities?

Clean with a damp microfiber cloth and mild pH-neutral solution, then dry the fixture. Abrasive powders, metal polishes, bleach concentrates, and rough pads can create glossy patches or permanently alter the matte texture.

What preventive service should be performed after prolonged vacancy?

Flush the faucet supply, inspect the strainer, test the solenoid, clean both sensor windows, replace degraded batteries if applicable, circulate or replace stagnant soap, and reprime the dispensing tube before normal use resumes.

Which commissioning procedures verify complete BS10012-MB performance?

Commissioning should verify secure deck mounting, correct under-counter component placement, flushed water lines, clean filtration, leak-free connections, independent infrared detection zones, repeatable soap dosing, prompt water shutoff, controlled basin splash, and stable operation through repeated AC or battery-powered cycles.

BathSelect Dual Function Automatic Deck Mount Matte Black Sensor Water Faucet and Soap Dispenser

Alternative Views:

Retail Price: $1,262.34

Sale Price: $1,209.29

You save $53.05!

Price with Selected Options: $1,209.29

Availability: Usually Ships in 5 to 10 Business Days
Product Code: BS10012-MB

Hot & Cold Option:

Qty:

Description

Technical Specs

Extended Technical Information

Oil Rubbed Bronze

Rose Gold

Gold

Brushed Nickel

BathSelect Dual Function Automatic Deck Mount Matte Black Sensor Water Faucet and Soap Dispenser

Plato Automatic Commercial Sensor Faucet D514 (Available in Oil Rubbed Bronze Finish)

Sensor faucet and soap dispenser complete motion detection operation.
Sensitive Sensor with Infrared AI Smart-Chip
Solid Brass Material, Long Life Durable Body, Matte Black Finish
Installation made easy with simplified instructions
Water-resistant solenoid enclosure
Advanced energy-saving design for long-lasting battery life
Comes complete with Hoses & Accessories
Time Delay: 0.5 seconds
Usage: Commercial
Ideal for commercial use applications in public restrooms, restaurants, office buildings, and public facilities. Fits all US standard plumbing. Fits all standard faucets. BathSelect touchless faucet comes with AC/DC option (hardwired and battery backup)Water Pressure: 0.5 - 7.0 KGS/cm, 10-125 psi.

Comes Complete for easy installation.

Reduces the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucet handles. Cut down on water usage by minimizing waste of water while soaping, lathering, scrubbing and drying hands by eliminating unnecessary and unattended water flow.

Sensor Activated Faucet Special Features:

Durable Vandal-Resistant Brass Body; Ideal for commercial high traffic use applications
Intelligent: with its micro-computer controlling its action, the faucet will self adjust its best detection zone as per the color and shape of the lavatory
Flashing light indicator; a diagnostic indicators for power up, low battery, and solenoid function.
Meaning of the codes are described in the installation instructions.
Convenient to maintain; with built-in strainer to prevent sundries from entering the solenoid valve and the strainer is easy to clean
Faucet can be mount to any sink surface.
ADA Compliant.
Batteries life 8,000 cycles per month and with enough water pressure is approx 5 year service life of the batteries.
Adjustable sensing range; while the factory range is set about 4"to 5"from the sensor, it can be adjusted.

Diameter of inlet pipe: DN15
Diameter of outlet pipe: DN15
Water Pressure: 0.05Mpa - 0.7Mpa
Power and Voltage: DC.6V, AC.220V - 50/60Hz
Power Consumption: 0.5MW, <2W
Detection Zone: Factory set 25cm/10" (based on standard inductive board)
Ambient Temperature: 1 - 45 ℃ / 33.8 -113 °F
Degree of protection by enclosure: 1P56

BathSelectDual Function Automatic Deck Mount Matte Black Sensor Water Faucet and Soap Dispenser

This is a water and soap dispenser deck-mounted faucet. The faucet has been designed to avoid soap dripping on the floor and for the users to spend less time in the restroom. The faucet body is made from matte black brass. The faucet has a sensor on the right side of the spout to activate the soap and a sensor just above the water outlet to activate the flow of water. Reduces the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucets or handles. Cut down on water usage by minimizing waste of water while soaping, lathering, scrubbing, and drying hands by eliminating unnecessary and unattended water flow

Sensor Faucet water-saving; hygienic; automatically opens and closes

to free hands - no-touch, avoid bacteria mutual infections!

A great addition to powder room; kids bathroom, hotels, restaurants, public places, government facilities...!

This Sensor Faucet Applications; Commercial use & ADA
This faucet is shipped complete. ANSI A112.18.1M CSA Standard B125, 2.2 U.S.
GPM Complies with NSF Standard 61, Section 9
Flow Preventers Stainless Steel Hoses Mounting Hardware Batteries Pre-installed
All the hardware necessary for satisfactory installation
Specifications and Dimensions
Spout: Matte Black Solid Brass Power: 4 (AA) Alkaline Batteries or AC Adapter
Battery life expectancy: 250,000 cycles Solenoid valve: 6 Volt magnet latching
Working Water Pressure: 1 PSI -100 PSI
Supply Inlet Size: 1/2” NPT Male
Temperature Control; check Options for temperature control sensor faucets
Built-in Pop-Up Drain
Rod: N/A
Sensor type and Location: Active Infrared, Neck mount Sensor
Microprocessor: Digital, Pug And Play Sensing Range: 2” to 6”
Response Time: 0.3 Second
Shut-Off Delay Time: 2 SecondsAnti vandalism maximum Running Time: 60 Seconds
Particle filter size: 50
Mesh Aerator: 2.2 GPM Standard

Features

We're available to provide assistance and support for your inquires!

Featured

EMI Protection, Infrared Stability & Countertop Integration

Which environmental condition can interfere with infrared sensor accuracy?

Highly reflective surfaces or direct infrared light sources positioned near the sensing window may reduce detection consistency during operation.

What countertop opening tolerance helps maintain proper fixture alignment?

A correctly sized mounting hole keeps the faucet body stable while preventing unnecessary movement during repeated activation cycles.

Why is electromagnetic shielding beneficial inside electronic faucet controllers?

Shielded circuitry helps minimize electrical noise that could affect sensor communication and solenoid performance.

Which surface characteristic distinguishes matte black finishes in commercial settings?

The low-gloss texture minimizes visible fingerprints and light cleaning marks while maintaining a uniform appearance.

Average Customer Review: Average Customer Review: 5 of 5

5 of 5 Total Reviews: 2 Write a review.

1 of 1 people found the following review helpful:

Great Faucet and Great Design!	February 9, 2023
Reviewer: Jeanne Boyce-Taylor from Alabama

My contractor have it installed three months ago, have been enjoying it so far. This faucet is very high quality. Unlike most modern faucet sets, this thing is made of solid metal, It's heavy brass with a thick matte black finish.

Was this review helpful to you?

1 of 1 people found the following review helpful:

Great Faucet and Great Design!	December 23, 2018
Reviewer: Jeanne Boyce-Taylor from Alabama

In practical use, this fixture showed stable and reliable operation. The BathSelect Great Faucet and Great Design! (Model BS10012-MB) demonstrated consistent sensor activation and controlled water flow. The solid brass construction supports durability, while the finish maintains its appearance under frequent use.

Installation was straightforward with standard connections, and the internal components allow for easy maintenance access. The sensor response is well-balanced, avoiding false triggers while ensuring user convenience.

BathSelect’s support team provided clear technical guidance during setup and helped streamline the process. Overall, the fixture meets commercial expectations for reliability, hygiene, and long-term performance.

Was this review helpful to you?

Need Help!Browse More Products In TheSame Category As This Item

Motion Sensor Touchless Bathroom Faucets Best Options
Motion Sensor Touchless Bathroom Faucets Best Options > All Sensor Faucets
Motion Sensor Touchless Bathroom Faucets Best Options > All Sensor Faucets > Matte Black Sensor Faucet
Matte Black Auto Sensor Faucets/Automatic Soap Dispenser