Access BathSelect™ product specification information for bathroom
faucets, shower systems, touchless fixtures, soap dispensers,
bathtubs, sinks and related products. Technical data supports
architects, designers, engineers, contractors and procurement teams
during product selection, coordination and project approval.
A product specification sheet provides technical information
used to evaluate fixture compatibility, dimensions,
connections, performance requirements and project coordination.
DimensionsOverall size, projection, height and relevant clearances.
MountingDeck, wall, ceiling or other applicable configuration.
ConnectionsWater, power and other applicable connection data.
PerformanceApplicable flow, pressure, temperature or operating information.
Specification Sheet Content
Technical Information for Product Coordination
The exact information varies by product, but BathSelect
specification resources may provide the key technical data
needed to evaluate a fixture before approval or installation.
Geometry
Product Dimensions
Review overall dimensions, spout projection, fixture
height, component sizes and other applicable measurements.
Installation
Mounting Information
Identify deck-mounted, wall-mounted, ceiling-mounted,
concealed or other applicable product configurations.
Utilities
Connection Requirements
Review applicable water supplies, plumbing connections,
electrical requirements and control interfaces.
Performance
Operating Data
Review relevant flow, pressure, temperature, sensing
or other product-specific performance information.
Technical Data Categories
Information You May Find on a Product Sheet
Not every data point applies to every fixture. Always use
the specification documentation for the exact BathSelect model.
Size
Overall Dimensions
Product width, height, depth, reach, projection and
applicable component dimensions.
Materials
Construction & Finish
Applicable body material, visible finish and relevant
product construction information.
Plumbing
Water Connections
Hot, cold or mixed-water requirements, connection
information and relevant supply details.
Performance
Flow & Pressure Data
Applicable flow-rate or operating-pressure information
where provided for the selected model.
Electronic Fixtures
Power & Sensor Requirements
Applicable AC, DC, battery, sensor, control-box or other
electronic information for touchless products.
Coordination
Rough-In & Clearances
Relevant mounting spaces, service clearances, wall
depths or countertop requirements where provided.
Configuration
Included Components
Identify the major components supplied with an applicable
faucet, shower or coordinated fixture system.
Compliance
Certification Information
Review applicable listed certifications or compliance
information when available for the exact product.
Product Identity
Model & Finish Reference
Confirm that the product code, configuration and finish
match the fixture being evaluated for the project.
Find Specifications by Product
Start With the Correct Fixture Category
Select the appropriate BathSelect product family and identify
the exact model before using dimensional or technical data.
Begin with product identity, then review dimensions,
mounting, connections and operating requirements. A
specification sheet should be considered together with
the applicable installation instructions and field conditions
before a product is released for installation.
Product Identity
Confirm the Exact Model
Make sure the specification corresponds to the exact
product, configuration and finish being purchased.
Dimensions
Review Overall Geometry
Confirm the dimensions that affect countertop,
basin, wall, ceiling or surrounding construction.
Mounting
Check Installation Type
Identify deck, wall, ceiling, concealed or other
mounting requirements before rough-in.
Connections
Verify Utility Requirements
Review water, drainage, electrical and control
requirements relevant to the selected product.
Performance
Review Operating Data
Check applicable flow, pressure, temperature,
sensing or power information.
Coordination
Compare With Field Conditions
Verify actual site dimensions and surrounding
construction before final installation.
Important Technical Note
Use the Specification Sheet for the Exact Product Model
Product families can include multiple sizes, configurations,
finishes, valves, power options and component arrangements.
Do not assume that specifications from a visually similar product
apply to another model. Product-specific documentation should be
used for final project coordination.
Choose the Right Technical Resource
Specification Sheets, Installation Instructions and BIM
These resources support different stages of product selection
and project coordination and should not be treated as interchangeable.
Product Data
Specification Sheet
Use the specification sheet to review product dimensions,
materials, mounting, connections, performance data and other
technical characteristics.
Use installation documentation for product-specific
mounting sequence, connection procedures, rough-in
coordination, testing and installation guidance.
Before approving or ordering a fixture, compare the
product documentation with the design, site conditions
and applicable project requirements.
Identity
Confirm Model & Finish
Verify the exact product code, configuration and
desired finish before final approval.
Dimensions
Confirm Available Space
Check fixture dimensions against countertops,
basins, walls, ceilings and surrounding construction.
Rough-In
Review Mounting Requirements
Confirm deck, wall, ceiling and concealed conditions
before plumbing or framing is finalized.
Utilities
Check Water & Power
Verify plumbing, electrical and control requirements
for the selected fixture.
Performance
Confirm Operating Requirements
Review applicable flow, pressure, temperature and
electronic performance information.
Compliance
Review Project Requirements
Confirm applicable codes, certifications, approvals
and owner requirements before installation.
Architects, Designers & Contractors
Use Specifications Throughout Project Coordination
Product specifications can support design development,
submittal review, procurement, rough-in coordination and
facility documentation. Maintain the approved product data
with the project record so design, purchasing and installation
teams are working from the same fixture information.
Architect / Designer
Product Selection
Confirm fixture configuration, dimensions and finish
during design development.
Engineering
System Coordination
Review plumbing, electrical and applicable operating requirements.
Contractor
Rough-In Coordination
Compare product data with actual construction and installation conditions.
Procurement
Order Verification
Confirm product model, finish and configuration before release.
Technical Project Resources
Continue With the Documentation You Need
Use product specifications together with the applicable
installation, BIM, visualization, maintenance and warranty resources.
If you cannot locate the technical sheet for a specific
BathSelect product, provide enough information for the
support team to identify the exact model and document needed.
Product
Model or Product Name
Provide the exact BathSelect product title, model,
SKU or product-page reference.
Finish
Selected Finish
Identify the applicable chrome, nickel, gold,
black or other finish configuration.
Project
Intended Application
Let us know whether the specification is for
residential, hospitality or commercial coordination.
Technical Need
Required Information
Describe whether you need dimensions, connections,
performance data, rough-in information or another detail.
BathSelect Technical Documentation
Need a Product Specification Sheet?
Provide the BathSelect product name or model, finish and
project requirement. The support team can help identify the
applicable technical documentation for your fixture.
