BathSelect Oil Rubbed Bronze Square Color Changing LED Rain Shower Head FAQ
Dual-Inlet Distribution, Thermal LED Feedback & Adjustable Ceiling Installation
This stainless-steel ceiling rain shower combines dual water inlets, four adjustable support arms, temperature-sensitive hydro LEDs, and a 2.4 GPM rainfall flow.
How do the two water inlets improve performance across the large square shower head?
The dual-inlet arrangement feeds water into separate areas of the internal distribution chamber, reducing pressure imbalance across the broad spray face and helping maintain more uniform rainfall at the outer nozzles.
What do the different LED colors indicate about the water temperature?
The LEDs display blue from 0–30°C, green from 30–40°C, and red from 40–50°C. Above 50°C, the red LEDs flash to provide a clear visual warning of unusually hot water.
Can the installation height be adjusted for different ceiling conditions?
Yes. Four ceiling support arms are adjustable from approximately 12 to 17 inches (29–43 cm), allowing the installer to coordinate the shower-head elevation with ceiling height and the required overhead clearance.
What water pressure is needed for stable rainfall and LED operation?
A minimum dynamic pressure of approximately 0.1 MPa (1 bar) is specified. Adequate pressure is important because the water must both sustain the 2.4 GPM rainfall discharge and drive the internal dynamo that powers the LEDs.