How does the infrared sensor distinguish intentional hand presence from background reflections?

The infrared control evaluates reflected signal strength within a defined detection field. Proper basin geometry and calibrated sensitivity help reject ambient reflections while allowing reliable activation when hands enter the intended washing zone.

Why must the sensor detection zone be validated after the faucet is mounted?

Deck height, basin reflectivity, spout projection, and nearby surfaces can alter infrared response. Field validation confirms dependable hand detection without unintended activation from the basin, drain, or surrounding countertop.

How does the automatic shutoff logic reduce unnecessary water discharge?

The controller closes the solenoid when hands leave the sensing field and applies a maximum run-time limit if an object remains detected, reducing continuous flow caused by obstruction or abnormal sensor conditions.

What role does the solenoid valve play in touchless faucet operation?

The normally closed solenoid converts the electronic sensor command into hydraulic flow control. Clean inlet water, stable voltage, and correct installation orientation support rapid opening, positive closure, and consistent duty-cycle performance.

Why should inlet strainers be installed and serviced in commercial applications?

Strainers intercept pipe scale, solder residue, and suspended debris before contaminants reach the solenoid diaphragm or flow-control components, reducing restricted discharge, incomplete closure, and premature valve wear.

How should the power system be arranged for dependable high-traffic operation?

The power source should remain accessible, correctly polarized, moisture protected, and compatible with the specified controller. Battery or hardwired connections must provide stable voltage during repeated sensor and solenoid cycles.

What maintenance protects the oil-rubbed bronze finish and sensor window?

Clean the body and sensor lens with a soft cloth and pH-neutral solution, remove mineral residue promptly, and avoid abrasives or aggressive chemicals that could damage the finish or reduce infrared transmission.

Which commissioning procedures verify complete BS-SF12BD sensor faucet performance?

Commissioning should verify secure deck mounting, flushed supply lines, clean strainers, leak-free connections, stable power, calibrated detection range, prompt solenoid response, controlled flow, automatic shutoff, false-trigger resistance, and repeated activation under representative basin conditions.

BathSelect Rio Oil Rubbed Bronze Finish Commercial Automatic Sensor Faucet

Alternative Views:

Retail Price: $778.25

Sale Price: $700.42

You save $77.83!

Price with Selected Options: $700.42

Availability: Usually Ships in 5 to 10 Business Days
Product Code: BS-SF12BD

Hot & Cold Option:

Qty:

Description

Technical Specs

Extended Technical Information

Chrome

BathSelect Rio Oil Rubbed Bronze Finish Commercial Automatic Sensor Faucet

Our BathSelect Rio Oil Rubbed Bronze Finish sensor faucet is the perfect choice for those who need a simple and efficient automatic bathroom faucet, for cold water only. It is easy to install, deck mount and has one hole. The oil rubbed bronze finish gives it a classic touch. The ceramic disc cartridge and the solid brass body and spout material insure a long-lasting hassle-free operation time. It comes complete with mounting accessories and installation instructions. Specified with sealed connectors and strain-relieved wiring to prevent fatigue in hardwired installations. Constructed with oil-rubbed bronze finish for durability, featuring optimized sensor range and flow restriction to meet commercial water efficiency standards.

BathSelect Rio Oil Rubbed Bronze Finish Commercial Automatic Sensor Faucet Specifications

Brand Name: BathSelect®
Model Number: BS-SF12BD
Function : Bathroom Sink Faucet
Feature : Sensor
Style : Contemporary
Material: Solid Brass
Finish : Oil Rubbed Bronze
Installation Hole : One Hole
Installation Type: Deck Mount
Valve Type : Ceramic Valve
Number of Handle: Touchless
Faucet Body Material : Brass
Faucet Spout Material : Brass
Commercial

Touchless operation; specifically designed for optimal performance in various commercial use applications, making it ideal for public restrooms, restaurants, office buildings, public facilities and hospitals. Fits all standard US plumbing.

BathSelect Rio Oil Rubbed Bronze Finish Commercial Automatic Sensor Faucet.

Features

We're available to provide assistance and support for your inquiries!

Featured

Infrared Detection, Solenoid Response & Water Conservation

How does the infrared sensor improve touchless operation?

The electronic sensor detects hand movement and activates water flow without physical contact.

How is automatic shutoff achieved after hand removal?

The solenoid valve closes immediately when the sensing field is cleared, reducing unnecessary water usage.

How does the oil rubbed bronze finish support commercial installations?

The durable finish helps conceal fingerprints and withstand frequent restroom use.

Why is a brass body preferred for sensor faucets?

Brass construction provides corrosion resistance and long-term structural reliability in commercial environments.

Average Customer Review: Average Customer Review: 4.5 of 5

4.5 of 5 Total Reviews: 17 Write a review.

3 of 3 people found the following review helpful:

Water flow regulation stayed stable	May 3, 2026
Reviewer: Derek Holloway, Systems Director from Kansas City, MO

Before upgrading to the Rio sensor faucet across several transportation and healthcare facilities between 2021 and 2024, we consistently dealt with older touchless systems that suffered from unstable infrared calibration, delayed shutoff timing, and finish degradation under heavy cleaning schedules. The Rio faucet delivered a noticeably more dependable long-term performance profile. Its intelligent infrared sensor maintained accurate activation without excessive false triggering, while the brass valve body and sealed solenoid assembly operated reliably even in high-moisture commercial environments. The oil-rubbed bronze finish also held up exceptionally well against corrosion, spotting, and coating wear compared to previous decorative sensor fixtures we had maintained. From a maintenance and facilities-management perspective, the faucet remained highly consistent across multiple locations. Water flow regulation stayed stable, battery efficiency exceeded expectations, and recalibration requirements were minimal throughout years of continuous daily usage. Compared to earlier commercial touchless models installed in the same properties, the Rio sensor faucet significantly reduced maintenance interruptions while improving overall restroom reliability and user consistency.”

Was this review helpful to you?

3 of 3 people found the following review helpful:

Perfect Water Pressure	January 17, 2022
Reviewer: Brian, M from Fresno, California

Great quality

Was this review helpful to you?

1 of 1 people found the following review helpful:

Surprisingly impressive product! Works perfect!	July 13, 2021
Reviewer: Daniel from Connecticut

We had ordered 7 sets of Rio Oil Rubbed Bronze Finish Commercial Sensor Faucet for our restaurant and we are happy with the results. Accurate sensor. Works round the clock perfectly. Durable and quality materials. Highly Recommended.

Was this review helpful to you?

5 of 5 people found the following review helpful:

Bronze finish	January 3, 2021
Reviewer: Scott, W from Seattle, Washington

Was this review helpful to you?

1 of 1 people found the following review helpful:

solid brass	May 2, 2020
Reviewer: Robert from Fort Smith, Arkansas

In practical use, this fixture showed stable and reliable operation. The BathSelect solid brass (Model BS-SF12BD) demonstrated consistent sensor activation and controlled water flow. The solid brass construction supports durability, while the finish maintains its appearance under frequent use.

Installation was straightforward with standard connections, and the internal components allow for easy maintenance access. The sensor response is well-balanced, avoiding false triggers while ensuring user convenience.

BathSelect’s support team provided clear technical guidance during setup and helped streamline the process. Overall, the fixture meets commercial expectations for reliability, hygiene, and long-term performance.

Was this review helpful to you?

View All Customer Reviews

Need Help!Browse More Products In TheSame Category As This Item

Motion Sensor Touchless Bathroom Faucets Best Options
Motion Sensor Touchless Bathroom Faucets Best Options > All Sensor Faucets
Motion Sensor Touchless Bathroom Faucets Best Options > Oil Rubbed Bronze Commercial Bathroom Touchless Sensor Faucets
Motion Sensor Touchless Bathroom Faucets Best Options > Commercial Touchless Sensor Faucets
Motion Sensor Touchless Bathroom Faucets Best Options > DECK MOUNT SENSOR FAUCET