Vienna Commercial Automatic Dark Oil Rubbed Bronze Motion Sensor Faucet & Automatic Soap Dispenser

Commission the faucet after the basin, countertop and surrounding fixtures are fully installed. The micro-computer controlled infrared system automatically optimizes its detection zone according to the lavatory color and geometry, helping reduce false activation.

Flush the water supply before final connection, verify all hoses and accessories are securely installed and confirm stable dynamic pressure before energizing the sensor and solenoid system.

The specified operating water-pressure range is approximately 0.5–7.0 kg/cm², also listed as 10–125 PSI. Confirm adequate dynamic pressure at the fixture during final commissioning.

The electronic control is factory configured for approximately 30-second automatic shutoff and can be adjusted where required. Verify reliable closure during commissioning to prevent unnecessary unattended water discharge.

The faucet uses micro-computer controlled infrared sensing with AI smart-chip logic for fully touch-free operation. Detection automatically adapts to the installed basin environment for dependable commercial activation.

The matching dispenser incorporates its own sensitive infrared AI smart-chip sensor. Confirm unobstructed hand detection, consistent soap delivery and adequate spacing between faucet and dispenser sensing zones during setup.

The sensor faucet supports AC110V and DC6V operation with an AC/DC power configuration. Verify the specified electrical connection before energizing the sensor and water-resistant solenoid enclosure.

Periodically clean both infrared sensor windows, inspect supply hoses and electrical connections and verify positive solenoid shutoff. Scheduled inspection helps maintain dependable touch-free operation in high-traffic commercial restrooms.