 |
 |
 |
 |
Automatic Automaic Hands Free Motion Sensor Faucet
Comes Complete for easy installation.
Reduces the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucets or handles. Cut down on water usage by minimizing waste of water while soaping, lathering, scrubbing, and drying hands by eliminating unnecessary and unattended water flow.
Sensor Activated Faucet Special Features:
- Durable Vandal-Resistant Brass Body; Ideal for commercial high use applications
- Intelligent: with its micro-computer controlling its action, the faucet will self adjust its best detection zone as per the color and shape of the lavatory
- Flashing light indicator; a diagnostic indicator for power up, low battery, and solenoid function.
- The meaning of the codes is described in the installation instructions.
- Convenient to maintain, with a built-in strainer to prevent sundries from entering the solenoid valve and the strainer is easy to clean
- The faucet can be mounted to any sink surface.
- ADA Compliant.
- The battery's life is 8,000 cycles per month and with enough water pressure is approx 5 years service life of the batteries.
- Adjustable sensing range, while the factory range is set about 4"to 5" from the sensor, it can be adjusted.
- Usage: Commercial
- Ideal for commercial use applications in public restrooms, restaurants, office buildings, public facilities, and hospitals. Fits all standard US plumbing.

- Diameter of inlet pipe
:
DN15
- Diameter of outlet pipe
:
DN15
- Water Pressure
:
0.05Mpa - 0.7Mpa
- Power and Voltage
:
DC.6V, AC.220V - 50/60Hz
- Power Consumption
:
0.5MW, <2W
- Detection Zone
:
Factory set 25cm/10" (based on standard inductive board)
- Ambient Temperature
:
1 - 45 ℃ / 33.8 -113 °F
- Degree of protection by enclosure
:
1P56
BathSelect® Manufacturer Warranty Information
Commercial Automatic Sensor Faucet Product Description
Residential electronically controlled faucets eliminate the need to touch or turn handles and the temperature and flow rate can be pre-set. Through the use of sensor beams the automatic faucet determines when an object is in front of it and automatically turns on the faucet. Since there is nothing to touch and nothing to reach for, an automatic faucet eliminates all of that cleaning and disinfecting that you do to try to maintain a hygienic surface. The automatic faucet provides water only when needed. Additionally, since these faucets are preset to shut off after approximately 30 seconds, accidental flooding can't occur if a person leaves it running. And, because they are hands-free, they help reduce the spread of germs and keep the vanity area clean. Fits all standard faucets. Uses 4AAA Alkaline Batteries (purchase separately).Water Pressure: 0.5 - 7.0 KGS/cm, 10-125 psi. Finish is polished chrome. Built-in In rared AI Smart-Chip.No Water Dripping Design100% Touch-free operation
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
Technical Details of Mirage Motion Sensor Faucet B5101
Sensor Faucet water-saving: water flows out when your hands approach it and stops immediately. Hygienic: self-open and close to free hands from any touching, which can efficiently avoid bacteria mutual infection
Hands Free Detailed Product Description:
- Water-saving: water flows out when your hands approach it and stops immediately
- Hygienic: self-open and close to free hands from any touching, which can efficiently avoid bacteria mutual infections
- Intelligent: with its micro-computer to controlling its action, the faucet can self adjust its best detection zone as per the color and shape of lavatory
- Low power consumption: For DC flushers, 4AA alkaline batteries can be used for 2 years at 200 cycles a day
- Convenient to maintain: There is a strainer inside to prevent sundries from entering the solenoid valve and the strainer is easy to clean
Faucet Line Model:
- Solid Brass Faucet.
- Hermetically Sealed Sensor and Electronics.
- Visible Low Battery Indicator.
- Battery (4 standard AA batteries) or A/C Powered.
- ome owners may find this model a great addition to the powder room or the kids bathroom
- This faucet is shipped complete. ANSI A112.18.1M CSA Standard B125, 2.2 U.S
- GPM Complies with NSF Standard 61, Section 9
- Flow Preventers Stainless Steel Hoses Mounting Hardware Batteries Pre-installed All the hardware necessary for satisfactory installation
- Specifications and Dimensions
- Spout: Chrome Plated
- Solid Brass Power: 4 (AA) Alkaline Batteries or AC Adapter
- Battery life expectancy: 200,000 cycles
- Solenoid valve: 6 Volt magnet latching
- Working Water Pressure: 1 PSI -100 PSI
- Supply Inlet Size: 1/2” NPT Male
- Water Temperature Control: Built-in Pop-Up Drain
- Rod: N/A Sensor type and Location: Active Infrared, Neck mount Sensor
- Microprocessor: Digital, Pug And Play Sensing Range: 2” to 6”
- Response Time: 0.3 Second
- Shut-Off Delay Time: 2 Seconds
- Maximum Running Time: 60 Seconds
- Particle filter size: 50
- Mesh Aerator: 2.2 GPM Standard
Main Features:
- Water-saving: water flows out when your hands approach it and stops immediately
- Hygienic: self-open and close to free hands from any touching, which can efficiently avoid bacteria mutual infections
- Intelligent: with its micro-computer to controlling its action, the faucet can self adjust its best detection zone as per the color and shape of lavatory
- Low power consumption: for 4 AA alkaline batteries can be used for 2 years at 200 cycles a day
- Convenient to maintain: there is a strainer inside to prevent sundries from entering the solenoid valve and the strainer is easy to clean
|
|
 |
 |
 |
 |

|