Lenox Commercial Chrome Wall Mount Motion Sensor Foam Soap Dispenser
Built for extremely reliable infrared activation and vandal resistance in high traffic commercial applications. The lenox commercial wall mount motion sensor foam soap dispenser which can dispense the soap efficiently has a fully chrome brass body finish. All in one sensor design and with 0.39 gal(1500 ml)capacity soap container can pump out soap right after sensed by the sensor eye. Use multi-voltage power supply, suitable for input voltage between AC 100V-240V,and it can meet the requirement of different projects.
It saves soap, water, and time as well. This touchless motion sensor faucet reduces the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucets or handles. It cut down on water usage by minimizing waste of water while soaping, lathering, scrubbing by eliminating unnecessary and unattended water flow. This wall mount foam soap dispenser Convenient to maintain with built-in strainer to prevent sundries from entering the solenoid valve and the strainer is easy to clean.Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals. Fits all standard US plumbing.
Lenox Comm ercial Chrome Wall Mount Motion Sensor Foam Soap Dispenser Features
Material: Brass Model Number: BS9801 Color: Chrome Type: Automatic Foam Soap Dispenser Color: Chrome Capacity: 0.39gal(1500ml) Usage: Bathroom, Washing, Public Place Installation: Wall mount Application: Bathroom foam soap dispenser Power supply: DC 6V Function: Anti-bacteria Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals. Fits all standard US plumbing.
Features
LENOX COMMERCIAL FOAM DISPENSER LINE
Lenox Foam Dispenser™
Commercial wall-mounted automatic foam soap dispenser with
chrome-finished brass construction, infrared sensor activation,
1,500 mL soap reservoir, electronic dispensing control,
and convenient touch-free operation.
✥
How Is the Infrared Sensor Calibrated?
+
Commission the infrared sensor after installing the dispenser
and surrounding washroom fixtures. The specified sensing
range is approximately 15 ± 3 cm. Verify dependable
hand detection, check for interference from reflective
surfaces, and confirm that soap dispensing stops correctly
after each activation.
◇
What Soap Viscosity Is Recommended?
+
The technical specification identifies a liquid soap
viscosity range of 100–3500 cP. Select a formulation
compatible with the foam dispensing system and verify
consistent foam production during commissioning.
Avoid soap containing abrasive particles or sediment
that could obstruct the dispensing mechanism.
◯
How Is Soap Dispensing Volume Adjusted?
+
The dispenser specification identifies four dispensing
volume settings with a nominal soap output below
2 mL per activation. Select the appropriate dosage
during setup according to washroom traffic and soap
consistency. Test several dispensing cycles to confirm
uniform delivery without excessive soap consumption.
↻
What Is the Sensor Response Time?
+
The infrared sensor has a specified activation time
of approximately 0.5–1 second. If soap dispensing
is delayed or inconsistent, clean the sensor window,
verify electrical power, inspect the soap level,
and examine the dispensing tube for blockages.
Confirm proper operation before returning the
unit to service.
⌁
What Is the Soap Reservoir Capacity?
+
The Lenox commercial foam soap dispenser includes
a 1,500 mL (0.39-gallon) soap reservoir. This capacity
supports use in commercial restrooms, offices,
hospitality facilities, and other public washrooms.
Establish a regular refill schedule based on usage
and inspect the reservoir connections during servicing.
⌂
What Power Supply Is Required?
+
The specification identifies DC 6V operation using
four 1.5V AA alkaline batteries, which are not
supplied. An AC-powered configuration is also listed.
Verify the supplied controller and its electrical
rating before connecting external power. Maintain
accessible service space for battery replacement
and electronic component inspection.
⚡
What Are the Wall Installation Requirements?
+
Coordinate the dispenser mounting position with the
washbasin, surrounding fixtures, and intended hand
detection area. Provide suitable wall support and
maintain access for the soap reservoir, tubing,
pump, and electrical components. Confirm mounting
details against the current BS9801 installation
instructions before final wall preparation.
⌕
How Is Consistent Foam Output Maintained?
+
Clean the infrared sensor window and dispensing
outlet during routine maintenance. Inspect the
reservoir, soap pickup tube, pump connections,
and power supply. Remove soap residue and
obstructions when necessary. Following reservoir
refilling or servicing, test multiple activation
cycles to verify consistent foam output and
reliable automatic shutoff.
‹
›
Chrome
♧
1,500 mL
Soap Reservoir
◇
Solid Brass
Chrome Construction
⌁
Infrared Sensor
Touch-Free Dispensing
⚙
4 Settings
Soap Volume Control
◇
DC 6V
4 AA Battery Supply
Perfect. 
