Installation Instructions for Missa Chrome Finish Dual Handle Bathroom Sink Faucet

Type: Sink Faucet Surface Finish: Chrome Feature: Thermostatic Faucets Surface Treatment: Polished Faucet Mount: Three hole Installation Type: Deck Mount Number of Handles: Dual Handles Style: Classic Valve Core Material: Brass Brass Body: 4" Bathroom Faucet Material: Brass, Zinc Installing Mode: 1/2" Specification: 4" Water Pressure: 4-6Bar Working Temperature: 5-80°C Usage: Wash Sink Function: Lavatory Ware

Specifications

• Brass body, zinc alloy handle
• Chrome finish

Product Description:

• Brass body, zinc handle, brass cartridge, chrome plating

BathSelect® Manufacturer Warranty Information

Frequently Specified by Architects for Aesthetics and quality

BathSelect Installation Instructions

If you need expert advice on installing bathroom faucets, our team is here to help! Whether you're working with the elegant Florence Antique Double Handle Bathroom Sink Faucet, the classic Genoa Antique Double Handle Sink Faucet, or the stylish Limoges Single Handle Sink Faucet, we've got you covered with detailed installation instructions. For a vintage touch, see the Leo Vintage Antique Gold Single Hole Bowel Faucet with detailed installation instructions. And for a modern touch, discover how to install the Abella Waterfall Sink & Bathtub Faucet with ease. Contact our team members for assistance and make your bathroom renovation a walk in the park `

Installation Florence Antique Double Handle Bathroom Sink Faucet
Installation Inst Genoa Antique Double Handle Sink Faucet
Installation Instructions Limoges Single Handle Sink Faucet
Installation for Brushed Gold Single Lever Sink Faucet Mixer
How to Install Abella Waterfall Sink & Bathtub Faucet

1. If your faucet comes with the brass T attached to the faucet body, unthread and remove the T and associated hardware.
2. Thread the silver mounting washer and rubber sealing gasket on the faucet body.
3. Apply a bead of silicone sealant to the underside of the spout, or faucet base, and thread through the center mounting hole.
4. Thread the mounting hardware and brass T onto the spout pipe and hand-tighten to secure.
5. Check to make sure the faucet is properly aligned and adjust as needed. When the faucet is in the proper position, finish tightening mounting hardware with your adjustable wrench. Tip: Make sure that the T outlets are aligned at an angle to allow maximum clearance for water connections.
6. Wipe away any excess sealant around the faucet base using your damp cloth.
7. Assemble the handles by screwing the lock nuts down to the end of the handle bodies. If handles are assembled move on to step 8.
8. Insert the handle bodies up through the mounting holes. Thread the plastic slip washers and rubber sealing gaskets onto the handle bodies to secure.
9. Hand tightens to attach the hot and cold flexible water feed tubes to the handle bodies and brass T. Give a ¼ turn with pliers or wrench, but don’t overtighten. (Hot water is always on the left and cold water is always on the right.) Curve tubes as necessary to ensure there are no kinks or knots.