Installation Instructions for Verona Deck Mount Brushed Gold Finish Single Lever Sink Faucet Mixer
Verona Deck Mount Brushed Gold Finish Single Lever Sink Faucet Mixer
Beautiful and elegant - those are the perfect words to describe the special brushed Gold Sink Faucet Mixer. The whole set comes with a single handle faucet body and is made of solid brass for longer service life. With the array of colors and designs, you will surely find one that will perfectly suit your personal taste and style. Perfect for the contemporary bathroom, this Bathroom Faucet exudes both luxury and style and will definitely complement any modern bathroom. This contemporary style brushed gold sink faucet, ideal for modern kitchens that aim for a ‘back in time’ design as well as modern bathroom. The finish is brushed gold, so it will easily become part of your décor. It is easy to install, deck mount, it requires a single hole installation. It is easy to use, with a single side handle and built in hot and cold water mixer. Only the best materials have been used: the body is made of solid brass and the valve cartridge is ceramic, for long lasting life time. It comes complete with accessories and installation instructions.
Verona Deck Mount Brushed Gold Finish Single Lever Sink Faucet Mixer Features
- Faucet Type : Sink Faucet
- Model Number: BST10040
- Installation : Deck mount
- Finish : Brushed Gold
- Main Body Material : Brass
- Handle Material : Zinc Alloy
- Valve : Ceramic Valve
- Water Feature : Mix Hot and Cold
- Water Pressures : Minimum 0.5 bar, 1.0 bar recommended
- Brass Body : Manufactured from brass, ensuring quality and longevity.
- Easy Operation : Single lever design for effortless flow and temperature control
- Hose Included : Including 50 CM or 20-Inch water supply hose, SUS304 Stainless Steel braided exterior, standard 3/8-In compression size
|
|
BathSelect® Manufacturer Warranty Information
|
|
2. Attach the provided braided water lines to the faucet until hand tight.
3. Remove the brass lock nuts from the mounting posts, and attach the threaded mounting posts to the faucet body using a Philips screwdriver. Set the brass lock nuts aside for now
4. Set the faucet into its prepared mounting hole.
5. From below, slide the rubber washer onto the mounting posts followed by the metal washer. Hold in place.
6. Secure the faucet by reattaching the brass lock nuts that were removed in step 3. Hand tightens and adjust the faucet until it is properly aligned. Once aligned, use the provided basin wrench to finish tightening the locknuts.
7. Apply plumber’s tape or thread sealant to the threading on each braided water line. Attach the water lines to your main water supply. Ensure that you are connecting the hot and cold lines accordingly.
8. Once installation is complete, turn the main water supply back on from underneath your sink. Check for any leaks underneath.
9. Check to ensure that both cold and hot water running properly. Allow the water to flow for approximately 60 seconds to remove any dust or sediment within the waterlines.
|
