Home > Installation Instructions Limoges Single Handle Deck Mount Bathroom Sink Faucet

Installation Instructions for Limoges Single Handle Deck-Mount Bathroom Sink Faucet

Limoges Single Handle Deck-Mount Bathroom Sink Faucet

Limoges is a contemporary style bathroom sink faucet in bright chrome finish. The length of the spout is the same as its height, which creates an interesting visual effect. It has a single handle and it comes with a built-in hot and cold water mixer. It is deck mount and it requires only one hole for installation. Only the best quality materials have been used – the body is made of solid brass, the handle is made of zinc alloy and the valve core material is ceramic, for a long lasting life time. It comes complete with accessories and installation instructions.

Limoges Single Handle Deck-Mount Bathroom Sink Faucet Specifications

  • Type : Bathroom Sink Faucet
  • Faucet Mount : Single Hole
  • Spool Type : Ceramic Plate Spool
  • Valve Core Material : Ceramic
  • Style : Contemporary
  • Hot & Cold Water : Yes
  • Number of Handle : Single Handle
  • Installation Type : Deck Mount
  • Surface Treatment : Chrome
  • Style : Single Holder Single Hole
  • Spout Length : 13CM (5.11")
  • Spout Height : 13CM (5.11")
  • Faucet Body Material: Brass
  • Handle Material : Zinc-alloy
  • Flow Rate: 1.8 GPM (6.81 L/min)
Limoges Single Handle Deck-Mounted Bathroom Sink Faucet
Limoges Single Handle Deck-Mounted Bathroom Sink Faucet Limoges Single Handle Deck-Mounted Bathroom Sink Faucet Limoges Single Handle Deck-Mounted Bathroom Sink Faucet
BathSelect® Manufacturer Warranty Information


Juno Brushed Nickel Square Bathroom Vessel Sink Faucet
2. Attach the provided braided water lines to the faucet until hand tight.

Juno Brushed Nickel Square Bathroom Vessel Sink Faucet
3. Remove the brass lock nuts from the mounting posts, and attach the threaded mounting posts to the faucet body using a Philips screwdriver. Set the brass lock nuts aside for now

4. Set the faucet into its prepared mounting hole.
Juno Brushed Nickel Square Bathroom Vessel Sink Faucet
5. From below, slide the rubber washer onto the mounting posts followed by the metal washer. Hold in place.

6. Secure the faucet by reattaching the brass lock nuts that were removed in step 3. Hand tightens and adjust the faucet until it is properly aligned. Once aligned, use the provided basin wrench to finish tightening the locknuts.

Juno Brushed Nickel Square Bathroom Vessel Sink Faucet

7. Apply plumber’s tape or thread sealant to the threading on each braided water line. Attach the water lines to your main water supply. Ensure that you are connecting the hot and cold lines accordingly.

8. Once installation is complete, turn the main water supply back on from underneath your sink. Check for any leaks underneath.

9. Check to ensure that both cold and hot water running properly. Allow the water to flow for approximately 60 seconds to remove any dust or sediment within the waterlines.

Juno Brushed Nickel Square Bathroom Vessel Sink Faucet


BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions