 |
 |
 |
|
BathSelect The Rook Chrome Matte Black Commercial Motion Sensor Faucet
Product Description
|
Commercial Sensor Faucet System; Engineered with dual-finish construction, precise activation, and long-term operational reliability. Bathroom sensor fixtures for toilets and sinks are anti-erosion, antiabrasion as well high strength - minimizing any wasted flow right away! The automatically Operated Touchfree Tap comes in a black finish made by a built-in Infrared AI Smart Chip that can self-adjust its best detection zone according to color or shape around so there won't even need touching anymore since everything gets done without ever having to touch anything else but simply pressing onto one button while standing next to your desired location within seconds flat!
|
Easily installed in new or retrofit applications.
Minimizes the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucets or handles. Cut down on water usage by minimizing waste of water while soaping, lathering, scrubbing and drying hands by eliminating unnecessary and unattended water flow.
Sensor Activated Faucet Special Features:
- Durable Vandal-Resistant Brass Body; Ideal for commercial high traffic use applications
- Intelligent: with its micro-computer controlling its action, the faucet will self adjust its best detection zone as per the color and shape of the lavatory
- Flashing light indicator; a diagnostic indicator for power up, low battery, and solenoid function.
- The meaning of the codes is described in the installation instructions.
- Convenient to maintain; with a built-in strainer to prevent sundries from entering the solenoid valve and the strainer is easy to clean
- The faucet can be mounted to any sink surface.
- ADA Compliant.
- The battery's life is 8,000 cycles per month and with enough water pressure is approximately 5 years service life of the batteries.
- Adjustable sensing range; while the factory range is set about 4"to 5" from the sensor, it can be adjusted.
- Diameter of inlet pipe: DN15
- Diameter of outlet pipe: DN15
- Water Pressure: 0.05Mpa - 0.7Mpa
- Power and Voltage: DC.6V AC.220V - 50/60Hz
- Power Consumption: 0.5MW <2W
- Detection Zone: Factory set 25cm/10" (based on standard inductive board)
- Ambient Temperature: 1 - 45 ℃ / 33.8 -113 °
- Degree of protection by enclosure: 1P56
|
|
|
 |
|
 |
|
Sensor Control 
Office use 
