 |
 |
 |
|
BathSelect Brio Chrome Wall Mounted Bathroom Touchless Faucet
Shining chrome geometry turns restroom walls into a cleaner, smarter focal point, while keeping hands free operation effortless for demanding interiors. Made from 304 stainless steel, with a brass valve core, this contemporary touchless faucet delivers durability, solid resistance to corrosion, and a polished appearance for modern projects. The wall-mounted design frees up the counter area, making a more refined vanity zone, good for upscale residential bathrooms, plus busy public facilities. Electronic infrared sensing starts the flow quickly, with a 0.3-second response time that makes everyday use easier, and also helps reduce needless contact. For steady performance, it relies on a 6V magnet latching solenoid valve, DC 6V power from four AA batteries, and an estimated lifespan of as much as 150,000 cycles. Framed as a premium spec choice, the BathSelect Brio™ Chrome Wall Mounted Bathroom Touchless Faucet fits airports, hotels, restaurants, shopping malls, office towers, healthcare centers, luxury apartments, entertainment venues, corporate washrooms, and other higher-end commercial locations. It works in a 0.05 ~ 0.8MPa water pressure range, and it connect through G1/2'' DN15 pipes for quicker setup. There is a 60-second shut-off delay, so it avoids endless running, also helps prevent unnecessary water flow. IP56 protection gives dependable use in damp moisture prone places, while the sleek modern style and solid internal parts keep it reliable. With a responsive touchless control chrome wall-mounted fixture, it brings lasting value for elegant bathrooms that want sanitation efficiency, and a more refined look. It feels efficient, you know, like it takes care of things without fuss.
Wall Mounted Sensor Precision
- Brand Name: BathSelect®
- Model Number: BST-293CH
- Style: Contemporary
- Type: Touchless Bathroom Faucet
- Finish: Chrome
- Installation Type: Wall Mounted
- Feature: Sense Faucets, Electric Faucets
- Material: 304 Stainless Steel
- Valve Core Material: Brass
- Solenoid Valve: 6V Magnet Latching
- Response time: 0.3 Seconds
- Shut-off delay time: 60 Seconds
- Sensor type: Active Electronic Infrared
- Water Pressure: 0.05~0.8MPa
- Dia of Pipes: G1/2'' (DN15)
- Power and Voltag: DC.6V (4pcs AA Batteries)
- Battery Life Expectancy: 150,000 cycles
- Protection Degree: IP56
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
BRIO TOUCHLESS SENSOR LINE
Brio™
Technical FAQs
Wall-mounted infrared touchless faucet with 0.3-second response, IP56 protection, stainless-steel construction and commercial-grade electronic valve control.
✥
Sensor Calibration Procedure?
+
Complete sensor commissioning after the basin,
finished wall and surrounding accessories are installed.
Verify reliable hand detection throughout the intended
washing zone and confirm that reflective surfaces do
not cause unintended infrared activation.
◇
Hydraulic Checks During Installation?
+
Flush the supply line before final connection, confirm
the G1/2" / DN15 fitting is secure and inspect the
waterway for construction debris. Verify stable dynamic
pressure before commissioning the electronic valve.
◯
What Is the Sensor Response Time?
+
The active electronic infrared sensor is specified
with an approximately 0.3-second response time,
providing rapid hands-free activation for commercial
and high-use bathroom applications.
↻
Continuous Water Flow Diagnostics?
+
Clean the infrared sensing window, remove reflective
objects from the detection field and inspect the
water-control assembly for debris. Confirm that the
6V magnet-latching solenoid closes completely after
each activation cycle.
⌁
What Water Pressure Is Supported?
+
BathSelect specifies an operating pressure range of
approximately 0.05–0.8 MPa. Maintain stable dynamic
inlet pressure and regulate excessive pressure where
required for consistent sensor-valve performance.
⌂
What Power Configuration Is Used?
+
The Brio operates from DC 6V using four AA batteries.
BathSelect specifies an expected battery service life
of approximately 150,000 operating cycles under normal
installation conditions.
⚡
How Is the Electronic Assembly Protected?
+
The sensor system carries an IP56 protection rating,
providing resistance against dust ingress and water
exposure associated with normal bathroom and commercial
washroom operating environments.
⌕
Routine Maintenance Requirements?
+
Periodically clean the sensor window and outlet,
inspect supply connections, verify battery condition
and confirm reliable solenoid activation and complete
automatic shutoff during scheduled maintenance.
Chrome
♧
0.3 Second
Rapid Response
◇
IP56
Protected Electronics
⌁
0.05–0.8 MPa
Operating Pressure
◇
G1/2" / DN15
Commercial Connection
|
|
|
|
|
|
|
