Chrome

Light Oil Rubbed Bronze

Brushed Nickel

Matte Black

lid Brass Rose Gold Construction Platinum Thermostatic Automatic Commercial Sensor Faucet

Intelligent: with its micro-computer controlling its action, the faucet can self-adjust its best detection zone as per the color and shape of the lavatory! Sensor Faucet finish is polished chrome, with built-in Infrared AI Smart-Chip No Water Dripping Design with 100% Touch-free operation. Sensor faucet. Reduces the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucets or hand Cut down on water usage by minimizing waste of water while soaping, lathering, scrubbing and drying hands by eliminating unnecessary and unattended water flow.

Platinum Sensor Faucet Special Features:

• Durable Vandal-Resistant Brass Body; Ideal for commercial high traffic use applications
• Intelligent: with its micro-computer controlling its action, the faucet will self-adjust its best detection zone as per the color and shape of the lavatory
• Flashing light indicator; a diagnostic indicator for power up, low battery, and solenoid function.
• The meaning of the codes is described in the installation instructions.
• Convenient to maintain; with a built-in strainer to prevent sundries from entering the solenoid valve and the strainer is easy to clean
• The faucet can be mounted to any sink surface.
• ADA Compliant
• The battery's life is 8,000 cycles per month and with enough water pressure is approx 5 years service life of the batteries.
• Adjustable sensing range; while the factory range is set about 4"to 5" from the sensor, it can be adjusted.

• Diameter of inlet pipe: DN15
• Diameter of outlet pipe: DN15
• Water Flow Rate: 1.3 GPM (gallons-per-minute)
• Power: DC.6V
• Detection Zone: Factory set 25cm/10" (based on standard inductive board)
• Ambient Temperature: 1 - 45 ℃ / 33.8 -113 °
• Degree of protection by enclosure: 1P56
• Usage: Commercial

• Overall Height: 7" (measured from the countertop to the highest part of the faucet)
• Spout Height: 3-1/2" (measured from countertop to the spout outlet)
• Spout Reach: 4" (measured from the center of the faucet base to the center of the spout outlet)
• Mounting Type: Single hole
• Number of Holes Required for Installation: 1
• Faucet Centers (Distance Between Handle Installation Holes): Single Hole
• Flow Rate: 1.3 GPM (gallons-per-minute)
• Maximum Deck Thickness: 1-5/8"
• Infrared sensor operation with temperature control.