Home > Installation Instructions for BathSelect Oil Rubbed Bronze Square Color Changing LED Rain Shower Head

How to Install BathSelect Oil Rubbed Bronze Square Color Changing LED Rain Shower Head | BST-008-1ORB


LED shower head will turn your shower into one that looks exceptional. If you already have oil rubbed bronze in your bath fixtures, it makes perfect sense to invest in oil rubbed bronze Rainfall Showerhead. Turn on the fun in your shower just by turning on the water, the LED lights will automatically light up and set the mood. They will even change colors automatically based on the water temperature. All this with no batteries, everything is self-powered by a built-in dynamo that takes advantage of the water pressure to create the energy to light the bulbs. The Oil Rubbed Bronze Shower Head comes complete ready to install (you only need 2 water entries).


Features:Visit Product Page
  • Installed as Ceiling Mount, comes with four adjustable shower arms 12"- 17"(cm 29~43)
  • This high tech rain shower head powers the LED lights using a built-in hidden dynamo
  • The lights will automatically turn on when water pressure is turned on
  • The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water, and light
  • The showerhead will automatically change colors according to the temperature of the water so you always know how the water will feel on your skin just by looking at it
  • Never be scalded again by entering a shower that is just too hot.
  • The Showerhead comes with 4 ceiling Oil Rubbed Bronze mount arm
  • Modern Stylish Design Completely polished chrome made to match or stand out from your other bathroom fixtures
  • This High Quality modern shower head is made out of Stainless Steel with Oil Rubbed Bronze finish, it's made to last!!
  • The LED lights will last the lifetime of the showerhead
  • When in use you can even turn your bathroom lights off since this showerhead will illuminate your shower.
  • Four adjustable arms extends from12"- 17" (cm 29~43)
  • The Fontana Oil Rubbed Bronze shower head has a water flow rate of 2.4GPM (9L/min)
  • showerBathSelect Oil Rubbed Bronze Square Color Changing LED Rain Shower Head

    Important Note:

  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the products for any shipping damages. If you find damages, do not install.
  • Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.


  • Shower Head Installation Instructions

    shower
    Available in multiple sizes

    Step 1: Step 2:
    According to the template (B) mark the location of the mounting holes (1). Use a drill with a 6mm bit to drill mounting holes into studs or blocking.

    Install the mounting brackets (C) with the tapping screws (D1). Thread the shower bars (E) onto the mounting brackets, and the inlet hose (F) onto the water inlet.


    Step 3: Step 4:
    Attach the shower head (A) to the shower bars (E). Connect the inlet hose (F) to the showerhead.

    2 water inlets so the water disperses equally throughout the showerhead.




    Step 5:









    Additional Information:

    Specification:

    - The LED lights are powered by water flow and will be activated once the water is turned on.
    - Constructed from stainless steel for durability and reliability.
    - Finished in high quality, corrosion-resistant.
    - Not suitable for low pressure. The minimum required water pressure is 0.1 MPa (1 bar).
    - Flow rate 2.4 GPM (9 LPM).
    - The LED light will change its color by detecting water temperature:
    - 0-30 °C (32-86 °F): Blue LED
    - 30-40 °C (86-104 °F): Green LED
    - 40-50 °C (104-122 °F): Red LED
    - 50-100 °C (122-212 °F): Flashing Red LED

    BathSelect Installation Instructions