How should the infrared detection field be configured for a reflective hospitality basin?

The sensing range should be adjusted so hand movement is detected beneath the outlet without allowing the basin wall, drain trim, or countertop edge to produce continuous reflected signals and unintended activation.

Why should the commercial faucet be tested with water present inside the basin?

Water changes the basin's infrared reflectivity and may alter sensor response. Wet-condition testing confirms that the controller maintains dependable activation and shutoff under representative hospitality restroom operating conditions.

How does normally closed solenoid operation improve failure-state water control?

A normally closed valve stops water flow when electrical power is unavailable or the controller is disconnected, reducing uncontrolled discharge while allowing the faucet to open only after a valid sensor command.

What causes delayed or incomplete solenoid closure in a sensor faucet?

Pipe debris, mineral accumulation, damaged diaphragms, unstable supply pressure, or incorrect valve orientation can prevent rapid closure. Flushed supply lines and clean inlet strainers reduce these failure conditions.

How should the power and control components be protected beneath the lavatory?

The controller, battery compartment, transformer connection, and cable entries should remain accessible but isolated from drain leakage, condensation, cleaning spray, and standing water that could compromise electrical reliability.

Why is dynamic-pressure testing important in a multi-fixture hotel restroom?

Dynamic testing confirms that simultaneous fixture demand does not reduce pressure below the level required for stable discharge, rapid solenoid response, and consistent handwashing performance at each installed faucet.

What preventive maintenance supports reliable high-cycle sensor operation?

Maintenance should include cleaning the sensor lens, flushing inlet strainers, checking electrical connections, inspecting the solenoid diaphragm, verifying automatic timeout, and cleaning the oil-rubbed bronze surface with nonabrasive products.

Which commissioning procedures verify complete BS-SF12BDDP faucet performance?

Commissioning should verify secure mounting, flushed supplies, leak-free connections, protected electronics, stable power, wet-basin sensor calibration, prompt activation, positive solenoid closure, timeout operation, false-trigger resistance, and repeatable performance during simulated high-traffic use.

For Luxury Hotel Lobby Restroom BathSelect Rio Oil Rubbed Bronze Finish Commercial Automatic Sensor Faucet

For Luxury Suite BathSelect Rio Oil Rubbed Bronze Finish Commercial Automatic Sensor Faucet

Alternative Views:

Retail Price: $588.47

Sale Price: $529.62

You save $58.85!

Price with Selected Options: $529.62

Availability: Usually Ships in 5 to 10 Business Days
Product Code: BS-SF12BDDP

Hot & Cold Option:

Qty:

Description

Technical Specs

Extended Technical Information

For Luxury Suite BathSelect Rio Oil Rubbed Bronze Finish Commercial Automatic Sensor Faucet

Our BathSelect Rio Oil Rubbed Bronze Finish sensor faucet is the perfect choice for those who need a simple and efficient automatic bathroom faucet, for cold water only. It is easy to install, deck mount, one hole. The oil rubbed bronze finish gives it a classic touch. The ceramic disc cartridge and the solid brass body and spout material insure a long-lasting hassle-free operation time. It comes complete with mounting accessories and installation instructions.

For Luxury Suite BathSelect Rio Oil Rubbed Bronze Finish Commercial Automatic Sensor Faucet

Brand Name: BathSelect
Model Number: BS-SF12BDDP
Function : Bathroom Sink Faucet
Feature : Sensor
Style : Contemporary
Material: Solid Brass
Finish : Oil Rubbed Bronze
Installation Hole : One Hole
Installation Type: Deck Mount
Valve Type : Ceramic Valve
Number of Handle: Touchless
Faucet Body Material : Brass
Faucet Spout Material : Brass
Commercial / Residential

Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals. Fits all standard US plumbing.

Features

Hotel Rio Commercial Sensor Faucet FAQ

Hospitality Sensor Accuracy, Electronic Control & Finish Longevity

How does touchless activation improve hospitality hygiene?

Hands-free operation minimizes shared contact points while providing consistent faucet activation.

How is stable electronic valve operation maintained?

The integrated control system synchronizes sensor detection with rapid solenoid valve response.

How does the faucet reduce unnecessary water discharge?

Automatic flow termination occurs when the user leaves the sensor detection zone.

What makes the exterior suitable for high-use bathrooms?

The oil rubbed bronze finish resists everyday wear while maintaining a refined commercial appearance.

Average Customer Review: Average Customer Review: 3 of 5

3 of 5 Total Reviews: 1 Write a review.

1 of 1 people found the following review helpful:

Generic Luxury Avoided	Wednesday, June 3, 2026
Reviewer: Valerie Kingsford from Jackson Hole, WY

Rio gave our mountain hotel's premium suites a touchless fixture without introducing the polished chrome appearance that conflicted with the darker bathroom palette. The oil-rubbed bronze treatment works convincingly beside stone, timber, and warm lighting, while sensor activation provides the modern interaction guests now expect. Winter occupancy gave the first rooms an immediate high-volume test. Engineering reported dependable operation and no unusual learning curve for guests. The strongest result is that technology has been added without making the suite feel less residential or relaxed.

Was this review helpful to you?

Need Help!Browse More Products In TheSame Category As This Item

Hospitality/Hotel Touchless Faucets |BathSelect
Hospitality/Hotel Bronze Finish Touchless Faucets Premier Selection