What sensor technology is used?
BathSelect BS1107LORB wall-mount motion faucet is an infrared (IR) electronic sensor platform designed for hands-free activation.
Is detection range adjustable?
The sensing zone is listed as 16–32 cm and can be adjusted to match basin depth, spout projection, and traffic patterns.
How fast does water start?
Inductive opening time is specified at under 1 second; verify stability after calibration and strainer cleaning.
How fast does water stop?
Inductive closing time is specified at under 2 seconds; ensure the sensor lens is clean to prevent run-on.
What power source is supported?
AC/DC operation: DC 6V via 4×AA batteries or AC 220–240V, 50/60Hz, depending on project power strategy.
What pressure range is required?
The technical range is 0.05–0.7 MPa; undersized pressure can cause weak stream, delayed shutoff, or re-triggering.
How reliable is sensor activation?
Reliability depends on correct aiming, controlled sensing distance, and glare management; avoid reflective basins and direct sunlight.
What duty-cycle is it built for?
Motor valve lifespan is listed up to 500,000 cycles; battery life is listed around 100,000 cycles under typical use.
What rough-in connections apply?
The inlet/outlet connection is specified as G1/2; confirm local thread standard compatibility and adapter needs before install.