Contractor & Engineer Guide

BathSelect Touchless Faucets & Soap Systems

Built for High-Throughput Commercial Restrooms

BathSelect touchless bathroom faucets and automatic soap dispensers are engineered for airports, offices, healthcare, retail, and hospitality. Infrared/ToF sensing, AC/DC power flexibility, and commercial-grade brass or stainless construction support uptime and water efficiency in heavy-traffic applications.

Hands-free | 0.35–1.5 GPM options AC 110–240V / DC battery packs Deck & wall-mount models Architect finishes: Chrome, Matte Black, Brushed Nickel, Gold

Product Specifications (Typical)

Construction	Solid brass or stainless body; PVD finishes for durability.
Sensing	Infrared / Time-of-Flight sensor with auto shutoff (~30s factory setting).
Flow	0.35–0.5 GPM (laminar) for hygiene efficiency; other aerators available.
Pressure	10–125 psi (0.5–7.0 kg/cm²) typical operating range.
Power	AC 110–240V with driver, or DC 6V (AA batteries) depending on model.
Mounting	Deck-mount and wall-mount variants; soap dispensers in deck/wall styles.
Warranty	Up to 5-year product warranty (model dependent).

Model-specific details: see each product page and specification sheet.

Installation Guidelines

Rough-in & Power: Provide AC outlet in the vanity/sink base or plan for DC battery pack access. Maintain clear service access for solenoid, control box, and soap reservoir.
Water Mixing: Use a thermostatic mixing valve (ASSE 1070/1017) for safe delivery; cold-fail shutoff recommended.
Sensor Aiming: Keep spout-to-basin distances per cut sheet to avoid bounce, and calibrate sensing distance if applicable.
Soap System: For multi-feed, locate reservoir above pumps where specified; route tubing to each dispenser per manufacturer layout.
Commissioning: Verify flow rate, auto-shutoff, purge/flush routine, and BIM/asset tags for CMMS/BMS where used.

Sample Install Instructions (PDF) Specs / BIM / Warranty

Compliance & Compatibility

ADA: Hands-free activation supports accessible operation; verify mounting heights/clearances per local code.
WaterSense / Low-flow: 0.35–0.5 GPM laminar options for hygienic, water-saving operation.
Plumbing: Fits standard U.S. plumbing; typical ½″ connections, model-specific on spec sheet.
Power: AC driver or DC battery pack; some SKUs offer hot-swappable batteries.
BMS/Smart: Selected smart SKUs provide telemetry & setup via BLE/IR, with options for BACnet/IP, Modbus TCP, or MQTT where offered.

Multi-Feed Soap Systems

For banks of sinks, multi-feed reservoirs can drive multiple automatic soap dispensers from a single tank, simplifying maintenance and refill cycles in stadiums, schools, and airports.

Browse Automatic Soap Dispensers

Digital / Smart & Telemetry

Digital thermostatic control, commissioning via mobile, and (on smart SKUs) optional BMS connectivity help facilities teams monitor usage and uptime across high-throughput fixtures.

Touchless Faucets Overview