 |
 |
 |
|
BathSelect Verona Series Matte Black Stylish Touchless Bathroom Faucet
Bold restroom styling can bring smarter performance with this wall-mounted touchless faucet, made for spots where a modern look, dependable operation, and sanitary water control have to stay spot on. The matte black finish gives a strong architectural vibe that works with minimalist vanities, stone surfaces, metal accents, and those more contemporary commercial interiors. And because it’s wall-mounted, it keeps the counter clear, lowers the visual clutter, and makes wipe downs simpler in high-traffic washrooms. Built from 304 stainless steel, with a brass valve core, the unit gives durable strength plus corrosion resistance for day-to-day service that never really slows down. Active electronic infrared sensing kicks on automatically, with a quick 0.3-second response, so hands stay off the direct contact surfaces. This also helps limit extra, unnecessary water flow. It runs on DC 6V batteries or an AC 220V supply, and the system uses a 6V magnet latching solenoid valve. Low power use is part of the deal, and the battery life is rated up to 150,000 cycles. The BathSelect Verona™ Series Matte Black Stylish Touchless Bathroom Faucet fits airports, hotels, restaurants, shopping malls, office buildings, universities, healthcare facilities, entertainment venues, and other commercial places where both elevated function and design matter. With IP56 protection, a G1/2'' DN15 pipe connection, a 25 cm detection range set at the factory, a 60-second shut-off delay, and operation across 0.05–0.8 MPa water pressure, it supports a more professional installation approach.
Stylish Sensor Performance Design
- Brand Name: BathSelect®
- Model Number: BST9902MB
- Type: Touchless Faucet
- Style: Contemporary
- Finish: Matte Black
- Installation Type: Wall Mounted
- Material: 304 Stainless Steel
- Protection Degree: IP56
- Feature: Sense Faucets, Electric Faucets
- Surface Treatment: Matt Finish Brushed Gold
- Faucet Mount: Single Hole Installation
- Valve Core Material: Brass
- solenoid valve: 6V magnet latching
- Response time: 0.3second
- Shut-off delay time: 60 seconds
- Sensor type: Active Electronic infrared sensor
- Water Pressure: 0.05~0.8Mpa
- Dia of pipes: G1/2'' (DN15)
- Power and Voltage: DC.6V (4pcs AA batteries)
- Battery life expectancy: 150, 000 cycles
- Diameter of inlet pipe: DN15
- Diameter of outlet pipe: DN15
- Water Pressure:
0.05Mpa - 0.7Mpa
- Power and Voltage: DC.6V, AC.220V - 50/60Hz
- Power Consumption: 0.5MW, <2W
- Detection Zone:
Factory set 25cm/10" (based on standard inductive board)
- Ambient Temperature: 1 - 45 ℃ / 33.8 -113 °F
- Degree of protection by enclosure: 1P56
|
|
|
 |
|
 |
|
