BathSelect 3-Way Ultra Stylish With High-Pressure Fixed Rain Showerhead & Silicon Nozzle- Rustic Oil Rubbed Bronze FinishBathSelect widespread Rustic light ORB Shower-head with faucet comes in light oil-rubbed bronze finished. This shower has hot & cold mixer. This faucet has been made with premium-grade lightweight. It is made of brass faucet body material. The valve core material is a high quality of ceramic. It is an in-wall shower faucet. 3 spray modes of this rainfall & waterfall showerhead: rainfall, waterfall and mixer modes. It's a great experience showering with the water falling directly overhead like rain or waterfall, offering you the luxury and relaxing shower enjoyment. The fixed shower head is with a sleek look, ultra-thin, combine with air-in technology leads to strong and high-pressure water. Soft silicone jets nozzles on the shower head sprayer, easy to clean by finger touching, prevent scale blockage.
BathSelect 3-Way Ultra Stylish With High-Pressure Fixed Rain Showerhead & Silicon Nozzle Specifications:
- Product Brand: BathSelect
- Product Code: BS9638
- Type: Bathroom Shower Head
- Installation Mount: Wall Mount
- Number of Handle: Single Handle
- Installation Type: US Standard
- Fixed Support: Yes
- Style: Contemporary
- Color: Light Oil-Rubbed Bronze
- Shape: Rectangular
- Material: Brass
- Customize: Yes
- Connection Size: G 1/2
- Fixed Support Type: Yes
- Valve Core Material: Ceramic
- Surface Finish: Bronze
- Faucet Body Material: Brass
- Surface Treatment: Oil-Rubbed Bronze
- Bath & Shower Type: In-Wall Shower Faucet
- Cold & Hot Water Type: Single Holder Dual Control
- Product Dimension: 39.37in x 11.81in x 5.91in
|  |
BathSelect® Manufacturer Warranty Information
Installation Instructions for BathSelect 3-Way Ultra Stylish Shower Head
1. Open the top cover and drill according to the marked position.
- Mark by the position of the four holes.
- Take care to avoid wires and pipes to prevent damage.
- Be sure to confirm that the four holes are on the same horizontal line.
2. Two inlet fittings are connected to the pipe joint of the wall; then the nut, expansion screw, and inlet pipe are connected.
3. Reinstall the top cover.
 
|
