Home > Installings Allora Dark Oil Rubbed Bronze Shower Set

Allora Dark Oil Rubbed Bronze Shower Set

Allora Dark Oil Rubbed Bronze Shower Set is the perfect choice for a bathroom that takes a classic yet minimalist approach to design. It has a streamlined look and appeal, and the wonderful and oil rubbed bronze finish sure adds a unique modern twist to the shower set. Aside from that, the handheld shower is just as great, with solid water pressure and a well-designed grip for better handling. If you are looking for a shower set that looks great and works great, with the added benefit of easy cleaning and maintenance. High-quality brass body, with anti-oxidation, rust prevention. Fitted with high-quality material and resistant durability.

BathSelect Allora Dark Oil Rubbed Bronze Shower Set Features:
Brand Name: BathSelect
Model Number: BST10050
Shower Style: Contemporary
Material: Brass, 304 stainless steel
Surface finish: Dark Oil Rubbed Bronze
Shower shape: Square
Shower Head Size Options : 8",10",12",16"
Shower Head Feature: LED Shower
Shower Water pressure: 2 to 75 psi
The flow rate: 2.5 GPM.
Shower Head Function: Rainfall
Main valve body: Lead-free copper
Thread Size:1/2" NPT Thread(US Standard)
Shower Arms Options: Wall Mount and Ceiling Mount
Shower arm length: 16" long
Flex Hose Length: 59"

BathSelect® Manufacturer Warranty Information
Installation Instructions for Allora Dark Oil Rubbed Bronze Shower Set

Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided

Shower-Head Installation

No tools required, ½ connector fits standard-sized shower plumbing.

Use your hands counterclockwise to unscrew the old showerhead and removed it.
Take out the showerhead, make sure the shower filter is placed in the connector.
Ensure the showerhead full horizontal alignment wall mounted shower arm thread.
Use your hands clockwise to tighten showerhead.

1. Install the valve body. Wrap the threaded portion of the joints in Teflon tape and connect the water inlet and outlet.

2. Put the protective cover on the valve body and finish the shower wall.

3. When the finished wall is complete, remove the protective cover.

4. Install the escutcheon, and handle it. Tighten the set screw with an Allen wrench to secure.

5. Attach the shower arm escutcheon to the shower arm. Wrap the threaded portions of the shower arm with Teflon tape and connect the arm to the shower inlet. Adjust the direction of the water flow as needed. Attach the rainfall shower head to the shower arm.

Hand-Held Shower Instructions

5. HOLE LOCATIONS FOR WALL MOUNT

Remove Front Cover (5A) from Wall Mount (5B). Use Wall Mount Screw Holes (5C) to place the desired location. Using a punch or awl, tap the screw hole locations. Holes must be vertically aligned.

6. ANCHOR INSTALLATION

Drill two 1/4” dia. Holes (6A). If installing into a studs drill two 1/8” dia. holes and do not use Anchors (6B). Insert Anchors (6B) into Holes (6A) and tap flush with wall.

7. WALL MOUNT INSTALLATION

Place Wall Mount (7A) into wall and inset Mounting Screws (7B) through Wall Mount Holes (7C) and tighten until Wall Mount (7A) is flush with the wall. Do Not Over Tighten! Insert Front Cover (7D) into Wall Mount (7A)

8. DROP ELBOW & HOSE INSTALLATION

Apply PTFE plumbers tape on both ends of Pipe Nipple (8A) (not included). Screw Pipe Nipple (8A) into the elbow inside the wall. The Pipe Nipple (8A) is to project 1/4” – 3/4” from the finished wall. Screw Drop Elbow (8B) onto Pipe Nipple (8A) and tighten until Drop Elbow (8B) is property positioned and flush to the finished wall.

Place Rubber Seal (8C) inside Hex Hose Fitting (8D). Connect Hex Hose Fitting (8D) into Drop Elbow Outlet (8E) by turning Hex Hose Fitting (8D).

9. UNIT STARTUP

Turn on hot and cold water supplies, and check all connections for leaks.

10. FINAL FLUSHING

For final flushing, turn the valve on and allow water to run through the Hose (10A) for several minutes. Allow water to run for several minutes until all foreign matter clears the line.

11. SHOWER ARM INSTALLATION
Place Rubber Seal (11A) inside Tapered Hose Fitting (11B). Conned Hand Shower (11C) to Hose (11D) by turning Tapered Hose Fitting (118) clockwise.