Home > Technical Guide: 16inch Oil Rubbed Bronze Square Shower Head
Installation Instructions for 16" Oil Rubbed Bronze Finish Square Shower Head



  1. Remove your existing shower head with a wrench.
  2. Set the wrench in place and turn the nut to the left to loosen it.
  3. Have a hand ready to catch the shower head when it falls so that the metal doesn’t crack your shower floor.
  4. Clean the threads of the base of the shower head steel wool.
  5. Be sure to remove any debris that had collected around the threads.
  6. Wrap the threads with Teflon tape, This tape comes with almost all new shower faucets and heads and provides traction for the new hardware.
  7. Place a rubber “O”-ring inside the new shower head and water connection, this prevents any leaks and improves water pressure.
  8. Tighten the LED shower head.
  9. Test the Temperature Controlled Shower Head to make sure there are no leaks and that everything is working properly.
  10. Now you have a huge improvement in your bathroom for a minimal amount of cost and effort.
BathSelect Oil-Rubbed Bronze Shower Collection
Explore 16-Inch Bronze Shower Heads
Browse related rainfall shower heads, bronze shower systems, mounting options and components.
Main Collections
All Shower Heads Rain Shower Heads Oil-Rubbed Bronze Shower Systems
Shower Head Type
Rainfall Shower Heads LED Shower Heads Square Shower Heads
Installation
16-Inch Bronze Installation Guide Wall-Mount Shower Heads Ceiling-Mount Shower Heads
Finish
Oil-Rubbed Bronze Showers Bronze Bathroom Faucets Bronze Bathtub Faucets
Technology
LED Shower Technology Multi-Color LED Showers Digital Shower Systems
Related Components
Shower Mixer Valves Body-Jet Shower Systems Complete Shower Systems
VIEW ALL OIL-RUBBED BRONZE SHOWERS →