How to Install Seirra Brushed Gold Rainfall Shower Set With Tub Spout And Hand Shower | BS9769
Enjoy the ultimate showering experience with the brushed gold rainfall shower set. Durable, dependable and with the luxury of a solid brass valve. Its a great addition to any bathroom. Shower heads are available in different sizes. Made to last long with an elegantly simple design.The shower set is cost-effective, environment friendly and hygiene complemented. Its water flow meets or exceeds strict regulations.The hand showers and water mixers will provide extra stimulation and enhance your showering experience to make your shower exactly the way you want.Its optimum design and innovative technology allows for voluminous soft droplets to make your showering experience a fun one.
Features:
Visit Product Page
Function: hot and cold
Model Number: BS9769
Handle number: single handle
Valve core material: ceramic
Cold / hot water control type: water mixer
Finish: Blushed Gold
Shower head material: Brass
Shower bath mixer marine valve seat: Brass
Arm shower: brass
shower
Important Note:
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the products for any shipping damages. If you find damages, do not install.
Please note all products must be installed by a professional and certified plumber otherwise warranty may be voided.
Wall Mount Shower Head Installation Instructions
Step 1:
Step 2:
Wall Mount Round Showerhead
Showerhead
Wall Mount Round Showerhead
Step 3:
Step 4:
Step 5:
Step 6:
1. Apply plumber’s tape to the threads on both ends of the shower arm and slide on the decorative escutcheon. 2. Insert the new arm into the fitting in the wall or ceiling and twist to tighten. Finish tightening with your adjustable wrench. Wrap a dry cloth around the shower arm to protect the finish while tightening with an adjustable wrench. Note: If your shower head does not feature a shower arm, connect the shower head directly to the fitting in the wall or ceiling. 3. Thread the new showerhead onto the arm and hand-tighten. Hold the shower arm in place with groove joint pliers and finish tightening the showerhead with your adjustable wrench. Wrap both in a dry cloth to protect the finish. 4. Before securing the decorative escutcheon to the wall, turn on the water supply to make sure that all connections are tight and there is no leaking. If no leaks are detected, continue with the installation. If leakage does occur, use your adjustable wrench to tighten the connections as necessary. 5. Apply a bead of silicone sealant to the back of the escutcheon and press firmly into place against the installation surface. Wipe away any excess sealant with your damp cloth. 6. Install the handle faceplate with the installation hardware. 7. Make sure the valve is in the OFF position and install your shower handle. Tighten the set screw in the middle or side of the handle to secure the handle in place.
