How to Install Romo 22" Contemporary RGB Multi Color Water Powered Led Shower Head | BD013-1

BathSelect Shower Head

With this two functions waterfall and rain shower head you can turn on the fun in your shower just by turning on the water, the LED lights will automatically light up and set the mood. They will even change colors automatically based on the water temperature. All this with no batteries, everything is self-powered by a built in dynamo that takes advantage of the water pressure to create the energy to light the bulbs.

Features:		Visit Product Page
Waterfall and Rain Shower head can work separately or combined. This high tech rain shower head powers the LED lights using a built in hidden dynamo The lights will automatically turn on when water pressure is turned on The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water and light The shower head will automatically change colors according to the temperature of the water so you always know how the water will feel on your skin just by looking at it Never be scalded again by entering a shower that is just too hot Modern stylish design completely made to match or stand out from your other bathroom fixtures High quality this modern shower head is made out of stainless steel, so it's made to last!	shower

Important Note: Before you begin, please read the installation instructions below. Observe all local building and safety codes. Unpack and inspect the product for any shipping damages. If you find damages, do not install. Please note all products must be installed by a professional and certified plumber otherwise warranty may be voided.

FEATURE :

Shower Head Installation Instructions

Size:

Step 1:			Step 2:
	shower
Remove the protective cover (F). Mark the positions and drill holes to suit the anchors (A). Install the anchors (A) and fix the rough-in valve (B) into the wall with screws. Use a level to ensure that the rough-in valve (B) is straight and level. (Important: Flush the water supply to remove any dirt and debris before installing the valve body).			Wrap Teflon tape around the pipe threads and connect water supply lines and in-wall pipes (not included) as desired to the rough-in valve (B). Turn on the water supply and open the cartridge to check for leakage. Then put on the protective cover and finish the wall surrounding the valve. (Note: Test the water pressure after the pipe connections have been made and before the finished wall material is installed).
Shower Head Installation Instructions
Step 3:			Step 4:
Fix the escutcheon (D) to the showerhead (E) with screws (C).			Remove the protective cover when the finished wall is completed. Then, install the showerhead (E) and press it against the finished wall.
Shower Head Installation Instructions

Waterfall
Rainfall