Contractor & Engineer Guide

BathSelect Touchless Faucets & Soap Systems

Built for High-Throughput Commercial Restrooms

BathSelect touchless bathroom faucets and automatic soap dispensers are engineered for airports, offices, healthcare, retail, and hospitality. Infrared/ToF sensing, AC/DC power flexibility, and commercial-grade brass or stainless construction support uptime and water efficiency in heavy-traffic applications.

Hands-free | 0.35–1.5 GPM options AC 110–240V / DC battery packs Deck & wall-mount models Architect finishes: Chrome, Matte Black, Brushed Nickel, Gold

High-throughput commercial restroom systems require touchless fixtures to be evaluated as an integrated combination of sensing accuracy, water delivery, power continuity, service access, durability, and maintenance planning rather than as isolated products. Architects and facility teams can review BathSelect touchless faucet engineering and performance options, compare configurations in the touchless faucet technical catalog, and apply the commercial restroom fixture standardization guide when planning airports, healthcare facilities, schools, stadiums, offices, hospitality properties, and other restrooms operating under sustained daily traffic.

Product Specifications (Typical)

Construction	Solid brass or stainless body; PVD finishes for durability.
Sensing	Infrared / Time-of-Flight sensor with auto shutoff (~30s factory setting).
Flow	0.35–0.5 GPM (laminar) for hygiene efficiency; other aerators available.
Pressure	10–125 psi (0.5–7.0 kg/cm²) typical operating range.
Power	AC 110–240V with driver, or DC 6V (AA batteries) depending on model.
Mounting	Deck-mount and wall-mount variants; soap dispensers in deck/wall styles.
Warranty	Up to 5-year product warranty (model dependent).

Model-specific details: see each product page and specification sheet.

Installation Guidelines

Rough-in & Power: Provide AC outlet in the vanity/sink base or plan for DC battery pack access. Maintain clear service access for solenoid, control box, and soap reservoir.
Water Mixing: Use a thermostatic mixing valve (ASSE 1070/1017) for safe delivery; cold-fail shutoff recommended.
Sensor Aiming: Keep spout-to-basin distances per cut sheet to avoid bounce, and calibrate sensing distance if applicable.
Soap System: For multi-feed, locate reservoir above pumps where specified; route tubing to each dispenser per manufacturer layout.
Commissioning: Verify flow rate, auto-shutoff, purge/flush routine, and BIM/asset tags for CMMS/BMS where used.

Sample Install Instructions (PDF) Specs / BIM / Warranty

Compliance & Compatibility

ADA: Hands-free activation supports accessible operation; verify mounting heights/clearances per local code.
WaterSense / Low-flow: 0.35–0.5 GPM laminar options for hygienic, water-saving operation.
Plumbing: Fits standard U.S. plumbing; typical ½″ connections, model-specific on spec sheet.
Power: AC driver or DC battery pack; some SKUs offer hot-swappable batteries.
BMS/Smart: Selected smart SKUs provide telemetry & setup via BLE/IR, with options for BACnet/IP, Modbus TCP, or MQTT where offered.

Multi-Feed Soap Systems

For banks of sinks, multi-feed reservoirs can drive multiple automatic soap dispensers from a single tank, simplifying maintenance and refill cycles in stadiums, schools, and airports.

Browse Automatic Soap Dispensers

Digital / Smart & Telemetry

Digital thermostatic control, commissioning via mobile, and (on smart SKUs) optional BMS connectivity help facilities teams monitor usage and uptime across high-throughput fixtures.

Touchless Faucets Overview