The Naples Round Stainless Steel Wall Mount Rainfall Shower Head | Installation
Naples Round Stainless Steel Wall Mount Rainfall Shower Head In Brushed Gold Finish
With this round stainless steel rainfall shower head you can experience the new style of showering. No electricity or batteries are needed and no need to figure out installation since it can be installed in minutes, by simply unscrewing the old shower head and screwing in the new shower head, and no connections or adapters needed it is made to fit all US 1/2" standard fittings that is simple .This high tech is self powered by water pressure and will automatically turn on in minute . The shower head has an adjustable built-in swivel connector so you can point the shower head in any direction. Simply you can turn on the fun in your shower just by turning on the water.
BathSelect® Manufacturer Warranty Information
Naples Round Stainless Steel Wall Mount Rainfall Shower Head In Brushed Gold Finish Features
- Showerhead Length :16"
- Showerhead Width :16"
- Material: Stainless Steel
- Finish: Available in Chrome, Satin Nickel, Copper Metallic and Gold Metallic finish
- Color: Brushed Gold
- Showerhead Style: Contemporary
- Rain Shower Mount Method: Wall or Ceiling Mount
- Connection :1/2" US standard (included)Shower Arm: Optional (purchased separately)
1. Ceiling arm mounting plate
3. Locking nut
4. Ceiling trim
5. Ceiling arm
6. Emily fixed showerhead
7. Fixing screws and wall plugs (not shown)
- Remove your existing shower head with a wrench.
- Set the wrench in place and turn the nut to the left to loosen it.
- Have a hand ready to catch the shower head when it falls so that the metal doesn’t crack your shower floor.
- Clean the threads of the base of the shower head steel wool.
- Be sure to remove any debris that had collected around the threads.
- Wrap the threads with Teflon tape, This tape comes with almost all new shower faucets and heads and provides traction for the new hardware.
- Place a rubber “O”-ring inside the new shower head and water connection, this prevents any leaks and improves water pressure.
- Tighten the LED shower head.
- Test the Temperature Controlled Shower Head to make sure there are no leaks and that everything is working properly.
- Now you have a huge improvement in your bathroom for a minimal amount of cost and effort.