Home > Installation Instructions for Venice Antique Brass Single Handle Faucet

Installation Instructions for Venice Antique Brass Single Handle Faucet | BS-RBAS21


Single Handle Deck Mounted Sink Faucet

The unique design and the elegant brass antique finish make it a suitable choice for any modern upgrades. It has a single handle and a built-in hot and cold water mixer. It is easy to install – deck mount, only one hole required. Only the best quality materials have been used – the body is made of solid brass, while the valve core material is ceramic, for a long-lasting lifetime. It comes complete with accessories and installation instructions.

Features:faucet
  • Brand: Fontana
  • Installation: Deck mount
  • Model: HD-267
  • Finish: Antique
  • Installation Holes: One Hole
  • Number of Handles: Single Handle
  • Finish: Antique
  • Style: Classical
  • Flow Rate: 1.4 Gal/Min
  • Working temperature: 0-90 degree
  • Valve Type: Ceramic Valve
  • Faucet center: Single Hole
Venice Antique Brass Single Handle Faucet

Important Note:

  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
  • Please note all showers must be installed by a professional and certified plumber otherwise warranty may be voided.

  • Faucet Installation Instructions





    Step 1: sink faucet Step 2: faucet

    Step 3: Step 4:



    1. Remove the mounting nut, metal washer, and rubber washer from the threaded pipe.
    2. Fit the O-ring into the groove of the faucet body. Screw waterlines into the corresponding screw-hole of the faucet body.
    3. Insert waterlines and threaded pipe into the hole of the sink.
    4. Install rubber washer, metal washer, and mounting nut back to the threaded pipe. Adjust the faucet body correctly and secure with mounting screws tightly.
    5. Connect waterlines to angle stops. Turn on the angle stops and check for leaks (DO NOT TURN FAUCET ON).
    6. Turn faucet on for 1 minute to flush any debris.

    Important: Turn on hot and cold water supplies and flush water lines into a container for one minute.
    This flushes away any debris that could cause damage to internal parts.
































    BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions