How To Install BathSelect Rainfall LED Color Changes Shower Faucet Single Handle Oil Rubbed Bronze Shower
BathSelect Shower Head
The BathSelect Rainfall LED Color Changes Shower Faucet Single Handle Oil Rubbed Bronze Shower has a modern luxurious look combined with a color-changing led that is a perfect match with any bathroom interior design. It has one single handle design where you can easily adjust temperature and volume to your preference. The rain shower head is made of solid stainless steel. It has 2 spray modes; rainfall & waterfall showerhead. It's a great experience showering with the water falling directly overhead like rain or waterfall, offering you the luxury and relaxing shower enjoyment. Easy wall-mount installation and easy to clean the spray holes with a touch of a finger
Features:
Visit Product Page
Type: Shower Set
Brand Name: BathSelect
Cold/Hot Water Control Type: Single Holder Dual Control
Style: Classic
Size: 5-7" [131-200 mm]
Number of Handle: Single Handle
Surface Treatment: Oil Rubbed
Type: Fixed Type
Valve Core Material: Ceramic
Surface Finish: Oil Rubbed Bronze
Bath & Shower Faucet Type: In-Wall Shower
Feature: Water Powered LED Light
Installation Type: Wall Mount
Added Features: Call for Options
Shower Head Material: Brass
Shower Head Size: 21.6"*9" [55*23cm]
Finish: Oil Rubbed Bronze
Distance of center to center: 5.3"-6.7" (13.5cm-17cm) can be adjustable
Shower height: 27.5"-47" (70-120cm) can be adjustable
shower
Important Note:
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.
FEATURE :
Showerhead Length
20"
Showerhead Width
8.6"
Material
Stainless Steel (304 US mirror)
GPM
2.5 GPM
Showerhead Style
RGB Contemporary Rain Shower
Shower Head Installation Instructions
Size:
Step 1:
Step 2:
shower
Remove the protective cover (F). Mark the positions and drill holes to suit the anchors (A). Install the anchors (A) and fix the rough-in valve (B) into the wall with screws. Use a level to ensure that the rough-in valve (B) is straight and level. (Important: Flush the water supply to remove any dirt and debris before installing the valve body).
Wrap Teflon tape around the pipe threads and connect water supply lines and in-wall pipes (not included) as desired to the rough-in valve (B). Turn on the water supply and open the cartridge to check for leakage. Then put on the protective cover and finish the wall surrounding the valve. (Note: Test the water pressure after the pipe connections have been made and before the finished wall material is installed).
Shower Head Installation Instructions
Step 3:
Step 4:
Fix the escutcheon (D) to the showerhead (E) with screws (C).
Remove the protective cover when the finished wall is completed. Then, install the showerhead (E) and press it against the finished wall.
Shower Head Installation Instructions
Open the top cover and drill according to the marked position.
Mark by the position of the four holes.
Take care to avoid wires and pipes to prevent damage.
Be sure to confirm that the four holes are on the same horizontal line.
Two inlet fittings are connected to the pipe joint of the wall; then the nut, expansion screw, and inlet pipe are connected.
.jpg)
.jpg)
.jpg)
