You are here: Home > Installation Manual Lima Multi Color Water Powered Led Shower

The Lima Dark Oil Rubbed Bronze Shower System, Recessed LED Rain Shower Head with Solid Brass Mixer in Oil Rubbed Bronze finish and 360° Adjustable Body Jets

Turn on the fun in your shower and experience the true feeling of rain, as well as SPA body massage spray, relieving fatigue and stress just by turning on the water in a high-pressure bathroom head shower with 360° 6 adjustable body spray jets and a hand shower with Solid Brass Mixer valve features stylish yet easy to use handles that control the flow and temperature of the water and a diverter that allows you to switch between the fixed head, hand shower or the body jets.. This shower set has been made with premium-grade lightweight and the LED lights will automatically light up and set the mood. They will even change colors automatically based on the water temperature. All this with no batteries, everything is self-powered by a built-in dynamo that takes advantage of the water pressure to create the energy to light the bulbs.

BathSelect Lima Multi Color Water Powered Led Shower Set Features:

  • Brand Name: BathSelect
  • Model Number: BT-892RB
  • Type: LED Shower Set
  • Material: Solid Brass
  • Finish: Dark Oil Rubbed Bronze
  • Style: Contemporary Rain Shower head
  • Shower head Height (thickness): 0.33
  • Shower head size: 23"x31"
  • LED Power Source: Water Flow
  • LED Color: Available without color-changing or with LED
  • Showerhead Mount Method Recessed/ Ceiling Flushed Shower head
  • Connection: 1/2" US standard (included)
  • Body Jets: Qty of 6 - 5" x 5" Body Jets in Dark Oil Rubbed Bronze
  • This high tech rain shower head powers the LED lights using a built-in hidden dynamo
  • The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water, and light
  • The Recessed shower head will automatically change colors according to the temperature of the water
  • Never be scalded again by entering a shower that is just too hot
  • High quality this modern shower head is made out of stainless steel, so it's made to last!
  • The flow rate is 2.5 GPM.
Lima Multi Color Water Powered Led Shower with Adjustable Body Jets and Mixer

Technical Specs

BathSelect® Manufacturer Warranty Information

How to Install Lima Multi Color Water Powered Led Shower With Adjustable Body Jets And Mixer


Installation Instructions For Lima Multi Color Water Powered Led Shower With Adjustable Body Jets And Mixer

  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
  • Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
showe Lima Multi Color Water Powered Led Shower with Adjustable Body Jets and Mixer

Shower Head Installation Instructions

Step 1: Step 2:
shower
LED Shower Head Installation Instructions
Step 3: Step 4:
According to the dimensions and shape of the mounting bracket, determine the bracket location to be installed in the ceiling. According to the 8 mounting holes on the mounting bracket, use an Electric drill to make the mounting holes.
Shower Head Installation Instructions
Step 5: Step 6:
Using the two hexagonal nuts adjust the distance between the mounting bracket and the ceiling, and keep the mounting bracket on the level.
Use an explosion screw to fix the mounting bracket on the ceiling, pay attention to the explosion screw, it can adjust the height and use level tool to adjust the mounting bracket to reach level.
Connecting Circuits





Shower Head Installation Instructions
Step 7: Step 8:
According to the chart shows: Raise the showerhead, Aim at the hole of the bolt, plug the bolt.





Use a Phillips screwdriver screw out the upper cover 4 screws, open the plastic waterproof boxes.
Note: The same color line docking, brown line for line, the blue line is zero line. Use a Phillips screwdriver screw out the screws in plastic waterproof box wiring position, then put the fork terminal line connected, then fix it with a Phillips screwdriver.

Shower Head Installation Instructions
Step 9: Step 10:
According to the circuit diagram as shown in step 5, then connect plastic waterproof case, please note that the same color of the wire when connecting circuit to docking. Connecting water hoses and Tee joints and then connect the water hoses to the water inlet pipe connector.
LED Shower Head Installation Instructions
Step 11: Step 12:
Connecting 4 pcs water hose to 2 Tee joints and G1/2 joints in the middle and then put another side of the shower hoses through the showerhead side holes. Installing the shower body by plugging the bolts. (As the above picture).

LED Shower Head Installation Instructions
Step 13: Step 14:
Install the decorative panel and twist the corresponding 8 fixing screws with a SW4 hex wrench. Install 4 LED lights and lamp cups clockwise.

LED Shower Head Installation Instructions
Step 15: Step 16:
Note: 1. Before connecting water hoses and water pipes, cleaning the water pipes first. It will prevent impurities from clogging the showerhead. 2. When connecting water pipes and hoses, don't forget to put the G1/2 filter net in the water hoses, filtering impurities. Connect 4 water inlet hoses to the wall-embedded water inlet pipes and then seal the wall.



LED Shower Head Installation Instructions
Step 17: Step 18:
LED Shower Head Installation Instructions
Step 19: Step 20:

LED Shower Head Installation Instructions
Step 21:


Shower Hand Held Shower Installation Instructions

Step 1: Step 2:
HandHeld
Shower
Hand
Held
Shower

Handheld Shower
Step 3: Step 4:


Tub Spout & Hand Shower Outlet Installation
• Complete the outlet pipework ensuring it ends in an appropriate 15mm x 1/2" BSP female thread elbow.

Note:
This fitting is not supplied as variations in installations require the selection of a suitable solder or compression fitting.

• Install the 'Wall Outlet', thread long male 1/2" BSP into the appropriate female fitting using PTFE tape to give a watertight joint.

Note: The thread can be cut to size if required. Make sure that all debris is removed from the connector and the section that has been cut is dressed correctly, before installation.

Shower Wall Holder Installation
Decide the position for the shower head holder on the wall within the bath showering area and proceed as follows:
• Hold the hand shower head holder fixing plate in a suitable position on the wall, mark out the position of the holder. Mark the two locating holes, these are 17mm center.
• Drill and plug the wall. Use an appropriate masonary drill, but if the wall is plasterboard or a soft building block, use special wall plugs and an appropriate drill bit.
• Slide the inserts onto the screws in the orientation. Secure the inserts by tightening the screws.
• Slide the hand shower head holder body onto the inserts and secure by tightening the grub screw facing down.




Shower Body Jets Installation Instructions

Step 1: Body
Sprays
Step 2:
installation
Step 3: Step 4:



Step 5: (Pressure Balancing Loop) Step 6:



Rough-in Suggestion:

This installation requires a 1/2" male threaded pipe fitting to extend 1/4" beyond the finished surface. The plumber should install a properly anchored 1/2" female pipe fitting (i.e. a drop-ear ell) recessed into the wall, into which a brass pipe nipple of proper length can be fitted once the finished wall is complete.
Note: The hole size opening should be 1.5" max diameter.

Bodyspray placement:

Custom shower systems are sized to the user or users. Bodysprays are normally placed at the upper back, middle back, and upper thigh. Always position bodysprays according to the preferences of the user(s).

Pressure Balancing Loop:
If installing bodysprays in a bank of 3 or fewer, a pressure balancing loop is not necessary.
If installing bodysprays in a bank of 4 or greater, a pressure balancing loop must be used to keep the pressure even between the bodysprays.


Shower Thermostatic Mixer Installation Instructions

Step 1: Step 2:
Shower
Mixer


Shower Valve Mixer Installation Instructions
Step 3: Step 4:
Please screw the handles out according to the above direction. Take board and four handles out of the faucet body.
Shower Valve Mixer Installation Instructions
Step 5: Step 6:
According to the actual size, get all pipe embedded mounts well ready. According to the product basic size, dig four holes on the ideal place of the wall.
Shower Valve Mixer Installation Instructions
Step 7: Step 8:
Place 4 tapping screws into the holes using a hammer.
Fix the faucet body by hand. And then take it into the four tapping screws.
Shower Valve Mixer Installation Instructions
Step 9: Step 10:
Connect hot & cold supply water pipes (not provided) and other water pipes.
After that, open the water to test if all pipes have leakage or not. At last, seal the wall.
Take the board onto the faucet body.


Shower Valve Mixer Installation Instructions
Step 11: Step 12:
Screws the handles into the handwheels.
a. Each water function handwheel
b. Tempering handwheel


How to install the Shower Set with Wall Mount Showerhead, Body Jets, Hand Held Shower and Shower Mixer

BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions