Home > Installation Instructions for Fort-De-France Single Handle Bathroom Sink Faucet

How to Install Fort-De-France Single Handle Bathroom Sink Faucet | BS183PQL


Single Handle Deck Mounted Sink Faucet

Fort-de-France is a solid bathroom sink faucet, in antique bronze finish. You can choose it either because it fits well together with other antique style elements in your bathroom, or because you need a fixture standing out in a modern environment. It has a single handle, built-in hot and cold water mixer and it requires one hole for installation. Only the best quality materials have been used - the valve core material is ceramic, for a long lasting life time. It comes complete with accessories and installation instructions.

Features:faucet installationVisit Product Page
  • Type : Bathroom Sink Faucet
  • Faucet Mount : Single Hole
  • Type : Ceramic Plate Spool
  • Valve Core Material : Ceramic
  • Style : Classic
  • Hot & Cold Water : Yes
  • Number of Handle : Single Handle
  • Installation Type : Deck Mount
  • Style : Single Holder Single Hole
  • Surface Treatment : Antique Brass
Fort-De-France Single Handle Bathroom Sink Faucet

Important Note:

  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
  • Please note all products must be installed by a professional and certified plumber otherwise warranty may be voided.

  • Faucet Installation Instructions


    Step 1: sink faucet Step 2: faucet

    Step 3: Step 4:



    1. Remove the mounting nut, metal washer, and rubber washer from the threaded pipe.
    2. Fit the O-ring into the groove of the faucet body. Screw waterlines into the corresponding screw-hole of the faucet body.
    3. Insert waterlines and threaded pipe into the hole of the sink.
    4. Install rubber washer, metal washer, and mounting nut back to the threaded pipe. Adjust the faucet body correctly and secure with mounting screws tightly.
    5. Connect waterlines to angle stops. Turn on the angle stops and check for leaks (DO NOT TURN FAUCET ON).
    6. Turn faucet on for 1 minute to flush any debris.

    Important: Turn on hot and cold water supplies and flush water lines into a container for one minute.
    This flushes away any debris that could cause damage to internal parts.











    BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions