Home > Installation Instructions for Dark Oil Rubbed Bronze Sierra Multi Color Water Powered Led Shower With Adjustable Body Jets And Mixer-Wall Mount Style

How to Install Dark Oil Rubbed Bronze Sierra Multi Color Water Powered Led Shower With Adjustable Body Jets And Mixer-Wall Mount Style | BS5221



BathSelect Shower Head With Shower Mixer, Body Massages Jets & Hand Shower

Turn on the fun in your shower just by turning on the water, the LED lights will automatically light up and set the mood. They will even change colors automatically based on the water temperature. All this with no batteries, everything is self-powered by a built-in dynamo that takes advantage of the water pressure to create the energy to light the bulbs. The showerhead will automatically change colors according to the temperature of the water so you always know how the water will feel on your skin just by looking at it. Solid stainless steel construction with an Oil Rubbed Bronze finish and a ceramic valve core material for long durability that will upgrade your bathroom with a modern and cool look. The Showerhead and 6 Bobby jets have a rainfall function where you can experience the true feeling of rain. You can install the rain shower head and handheld showerhead and body jets where you like just depend on the position of the concealed water pipe.

Features: Visit Product Page
  • Model Number: BS5221
  • Type: LED Shower Set
  • Material: Solid Brass
  • Finish: Dark Oil Rubbed Bronze
  • Style: Contemporary Rain Showerhead
  • Showerhead Height (thickness): 0.33
  • Showerhead Width: Available in 8", 10", 12", or 16"
  • Showerhead Length: Available in 8", 10", 12", or 16"
  • LED Power Source: Water Flow
  • LED Color: Blue, Green, Red
  • Connection: 1/2" US standard (included)
  • Shower Arm: Included
  • Body Jets: Solid brass 360 Adjustable Body Jets
  • Mixer Material: Solid Brass
  • Anti-scald
  • Threading Fitting: Fit in any standard shower head
  • Inclusion: Shower arm
  • Installation: Ceiling or Wall Mount arm
  • Design: Modern Stylish Design Stainless steel finish
  • Showerhead Material: Stainless Steel
  • Flow rate: 2.5GPM
shower Dark Oil Rubbed Bronze Sierra Multi Color Water Powered Led Shower With Adjustable Body Jets And Mixer-Wall Mount Style


Important Note:
  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
  • Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.

  • Shower Head Installation Instructions


    Ceiling Mount Shower Installation Instructions

    Step 1: Step 2:
    shower
    installation
    Step 3: Step 4:
    Step 5: Step 6:

    Step 1: Take Out the Old Shower Head
    You can easily remove it by hand, but depending on how long the rain showerhead has been installed, you might need to use an adjustable wrench. Hence, if you find it difficult to remove, rotate the showerhead with an adjustable wrench in a counterclockwise direction to unscrew it.

    Step 2: Keep the Shower Arm Clean and In Good Shape
    After you have removed the head, check the shower arm threads for any debris and old Teflon tape. If you find any, remove it and clean them off thoroughly. Its best to use a microfiber cloth when cleaning the thread because it removes Teflon tape perfectly and works great to pick up tiny grits.
    Once youre done cleaning, check if it is corroded or leaking. For damaged threads, it will be best you replace it entirely so you can have a comfortable shower experience any time.

    Step 3: Time to Add New Teflon Tape
    Since you have removed the old Teflon tape, you have to replace it with new ones. The reason is that this tape helps to protect the shower from leaking after installing the showerhead. Now apply the new Teflon tape about 3-5 turns on the thread and tear the end part. Use your hands to smooth it out to keep it leveled to the thread. Keep in mind that when applying the tape, you should go in a clockwise motion so that it doesnt come off when you attach the head in the same direction.

    Step 4: Connect the Showerhead
    As said earlier in the tools needed, were using the rubber sealing washer that comes with the showerhead. This tool helps to make the showerhead stay watertight and secured on to the thread. Ensure you place it properly before installing it.
    After that, reconnect the shower head and tighten it down with your hands. You can employ a chair or ladder to make things easier for you.

    Step 5: Tighten the Showerhead
    On To the Thread You will need to get the adjustable wrench handy to tighten down the shower very well. But make sure you wrap the threads with a terry cloth, so it doesnt damage the finish when tightening the showerhead.
    Once you have done that, now use the adjustable wrench to tighten down the showerhead. However, dont over-tight or force it so that its easier to remove in the future.


    Wall Mount Shower Head Installation Instructions

    Step 1: shower installation Step 2:
    Step 3: Step 4:
    Step 5: Step 6:
    Step 7:


    No tools required, connector fits standard-sized shower plumbing.


    1. Apply plumber's tape to the threads on both ends of the shower arm and slide on the decorative escutcheon.

    2. Insert the new arm into the fitting in the ceiling and twist to tighten. Finish tightening with your adjustable wrench. Wrap a dry cloth around the shower arm to protect the finish while tightening with adjustable wrench.

    3. Thread the new shower head onto the arm and hand-tighten. Hold the shower arm in place with groove joint pliers and finish tightening the shower head with your adjustable wrench. Wrap both in a dry cloth to protect the finish.

    4. Before securing the decorative escutcheon, turn on the water supply to make sure that all connections are tight and there is no leaking. If no leaks are detected, continue with the installation. If leakage does occur, use your adjustable wrench to tighten the connections as necessary.

    5. Apply a bead if silicone sealant to the back of the escutcheon and press firmly into place against the installation surface. Wipe away any excess sealant with your damp cloth.









    Hand Held Shower Installation Instructions


    Step 1: (Elbow)Step 2:
    Step 3: (Hand Shower Bracket)Step 4:
    Hand
    Held
    Shower
    Hand
    Held
    Shower

    Handheld Shower

    Hand Shower Outlet Installation
    Complete the outlet pipework ensuring it ends in an appropriate 15mm x 1/2" BSP female thread elbow.

    Note:
    This fitting is not supplied as variations in installations require the selection of a suitable solder or compression fitting.

    Install the 'Wall Outlet', thread long male 1/2" BSP into the appropriate female fitting using PTFE tape to give a watertight joint.

    Note: The thread can be cut to size if required. Make sure that all debris is removed from the connector and the section that has been cut is dressed correctly, before installation.

    Shower Wall Holder Installation
    Decide the position for the shower head holder on the wall within the bath showering area and proceed as follows:
    Hold the hand shower head holder fixing plate in a suitable position on the wall, mark out the position of the holder. Mark the two locating holes, these are 17mm center.
    Drill and plug the wall. Use an appropriate masonary drill, but if the wall is plasterboard or a soft building block, use special wall plugs and an appropriate drill bit.
    Slide the inserts onto the screws in the orientation. Secure the inserts by tightening the screws.
    Slide the hand shower head holder body onto the inserts and secure by tightening the grub screw facing down.







    Shower Body Jets Installation Instructions


    Step 1:Step 2:
    Body spray
    Remove the decorative plate (A) out of the body.

    Remove the screws from the outlet face (B) and connector body (C) with the Allen key (D).
    Body Spray Installation Instructions
    Step 3:Step 4:
    Screw the threaded pipe (E) to the water supply fittings. Push the plastic box (F) into the wall through the threaded pipe (E). Then, install the decorative plate (I) into the plastic box (F). Make sure the position is correct according to the diagram.

    Screw the connector (G) into the threaded pipe (E) with the Allen key (H). Install the connector body (C) to the connector (G). When finish installation, please check to make sure the connection is completed. Then, fix the screws into the body (C) with Allen key (D) and make sure the body (C), connector (G) and decorative plate (I) are tightened. Make sure the one side with the bulge is in the top position.
    Body Spray Installation Instructions
    Step 5:Step 6:
    Install the outlet face (B) to the body (C). Make sure the connection of body (C) and outlet face (B) are completed. Tighten the screw through the outlet face (B) into the body (C) with the Allen key (D).Install the decorative plate (A) into the outlet face (B) tightly. Make sure the hole and the raised dot are in the correct position when you push the decorative plate (A) into the outlet face (B).

    Body Spray Installation Instructions




    Shower Thermostatic Mixer Installation Instructions



    PartsOverview



    Hand
    Held
    Shower






    Connections





    1. Attach the positioning bar to the rough-in body with tapping screws. Mark the location of the mounting holes.
    2. Remove the rough-in body and drill pilot holes at the locations marked in the previous step. Insert anchors.
    3. Attach the rough-in body to the wall.
    4. Connect the rough-in body to the water supply pipes.
    5. Finish the wall surrounding the mixer with a thickness of 1/2"-1-1/2".
    a) The finished wall surface should not exceed the upper edge of the installation box.
    6. If the tile exceeds the edges of the installation box, trim the tile as necessary to install the trim plate.
    b) Trim the tile around the installation box as necessary.
    7. Remove the plastic guard and place the trim plate over the installation box.
    8. Install the screws covers, handles and buttons.




    BathSelect Installation Instructions