BathSelect® Kitchen Faucets with Integrated Soap Dispensers
Guidance for architects, engineers, and contractors on coordinating BathSelect kitchen faucets and deck-mounted soap dispensers — from hole patterns and finishes to hydraulics, under-sink equipment, and long-term maintenance.
Single / Double BowlPull-Down / Pull-OutDeck-Mount AssembliesSpec-Grade Finishes
Explore BathSelect faucet and soap dispenser sets used in high-performance kitchens and amenity spaces, with BIM/3D renderings, spec sheets, and warranty details.
Use engineering-focused guidance on BathSelect soap dispensers to coordinate bottle capacity, refill protocols, and compatibility with project cleaning chemistries.
Kitchen faucets with integrated soap dispensers, organized by duty level, finish, and workstation type.
For AEC Specifiers
Kitchen Workstation Starter Pack
Define the task profile (light, medium, heavy duty), sink configuration, and coordinated faucet + dispenser assembly before you lock countertop drilling patterns.
Turn the faucet and soap dispenser into a coordinated workstation that works for structure, finishes, plumbing, and operations.
Hole Pattern & Deck Thickness
Faucet, dispenser, and accessories
Lock in the number, size, and spacing of deck holes early. Confirm deck thickness range, reinforcement plates (for thin tops), and clearances for hands and pump head.
Coordinate solid brass or stainless bodies with matching PVD or plated finishes (brushed nickel, matte black, brushed gold) for both faucet and dispenser components.
Confirm flow rates against local codes, verify operating pressure ranges, and select pull-down spray heads with appropriate hose length and spray patterns.
Size under-counter bottles for expected traffic, define top-fill vs. bottle replacement in the spec, and coordinate clearances with pull-out trash, filters, and disposals.
Place the dispenser where users can reach without twisting, verify lever travel against backsplashes, and visually distinguish it from filtered water taps or air gaps.
Short kitchen-focused clips you can share with installers and facility teams to reduce callbacks and clarify operation.
Design Phase
Functional Role in the Layout
Classify the workstation duty level, confirm bowl count and type, and decide where the dispenser sits relative to the dominant hand so drawings, specs, and countertop shop drawings all match.
Verify torque and gasket compression, confirm hole sizing, test flow and spray patterns, and ensure the bottle can be removed without dismantling traps or pull-outs.
Document soap type, top-fill vs. bottle replacement, and service intervals in O&M manuals so facility and tenant teams know how to keep the workstation performing.
BathSelect is a U.S.-based bathroom and kitchen fixture manufacturer serving residential, hospitality, and institutional markets. With decades of experience supporting architects, designers, and contractors, BathSelect offers coordinated faucet and soap dispenser solutions that balance durability, aesthetics, and ease of maintenance for busy kitchens and amenity spaces.
Frequently Asked Questions
How many deck holes should I plan for a BathSelect kitchen faucet with soap dispenser?
Most integrated workstations use one hole for the faucet and one for the soap dispenser, with optional additional holes for a side spray, filtered water tap, or air gap. Always verify required hole diameters and minimum spacing on the product cut sheet before releasing countertop fabrication.
What deck thickness range do BathSelect faucets and dispensers support?
Many assemblies are designed for typical stone or solid-surface tops (often in the 1 1/4" range, plus underlayment). For very thin metal or compact laminate, you may need reinforcement plates. Always check the technical sheet or installation manual for the minimum and maximum clamping thickness.
How should I specify soap type and refill method?
In your spec language, call out the intended soap type (viscosity and use case), whether bottles are top-fill or replaced from below, and who is responsible for refills and maintenance. This avoids confusion between design intent and operations once the kitchen is in use.
What flow rates should I expect from BathSelect kitchen faucets?
Typical kitchen faucets fall in the 1.5–2.2 gpm range, depending on aerator choice and local code requirements. Confirm the rated flow on the product data sheet and coordinate with the project’s plumbing design and any water conservation goals or certifications.
