Home > Shower Set Installation Instructions for Oil Rubbed Bronze Waterfall BathSelect Sensor Controlled Shower Set

Shower Set Installation Details For Waterfall Automatic Sensor Shower

BathSelect Sensor Controlled Automatic LED Dark Oil Rubbed Bronze Waterfall/Rainfall Shower Set

The beauty of the oil rubbed bronze finish is in its versatility. It pairs well with traditional or contemporary decor and can be particularly effective if you're going for a more rustic look. This jumbo-sized shower-head features 252 self-cleaning spray nozzles to provide full-body coverage. The oil rubbed bronze finish offers a warm- rich look. With spray technology for optimal water distribution providing full-body rain spray. No assembly or tools required just unscrew your old shower head and twist by hand the new shower head till it locks in, and you are ready to enjoy your shower spa. This shower head flow rate is 2.4 GPM (gallons per minute) which is within the federal standard of 2.5 GPM.
BathSelect LED Dark Oil Rubbed Bronze Waterfall/Rainfall Shower Head Features:

Brand Name: BathSelect

Model Number: BS1034

Material: Stainless Steel

Finish: Oil Rubbed Bronze

Feature 1: Waterfall/Rainfall Sensor Shower

Mount Method: Wall Mount

Connection: 1/2" US standard

Feature: Sensor Controlled Automatic Shower with LED

BathSelect Sensor Controlled Automatic LED Dark Oil Rubbed Bronze Waterfall/Rainfall Shower Set

BathSelect® Manufacturer Warranty Information

Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty may be voided

shower

Waterfall Shower Set Installation Instructions

Step 1		Step 2 Step 3
Open the top cover and drill according to the marked position. Mark by the position of the four holes. Take care to avoid wires and pipes to prevent damage. Be sure to confirm that the four holes are on the same horizontal line Two inlet fittings are connected to the pipe joint of the wall; then the nut, expansion screw, and inlet pipe are connected. Reinstall the top cover.	Shower