Home > BathSelect® Trieste Deck-Mount Faucet Installation Guide, FAQs & Best Practices

Installation Instructions for Trieste Deck Mount Single Handle Faucet

Trieste Deck Mounte Single Handle Faucet with Hot/Cold Water Mixer

Our Trieste sink faucet is the perfect choice for any modern bathroom. It comes in an elegant design, with black paint that emphasizes the sleek lines and curves, and small chrome elements that make a nice contrast. You can choose between the short version (15 cm) and the tall version (24 cm), so it can fit any type of bathroom sink. Both models are deck mount, single hole, with built-in hot & cold water mixer. Only the best materials have been used – valve core in ceramic material, for a long lasting life time. It comes complete with accessories and installation instructions.

Trieste Deck Mount Single Handle Faucet Specifications

Type : Bathroom Sink Faucet
Valve Core Material : Ceramic
Surface Treatment : Painted
Installation Type : Deck Mount
Style : Single Holder Single Hole
Style : Contemporary
Number of Handle : Single Handle
Hot & Cold Water : Yes
Faucet Mount : Single Hole
Type : Ceramic Plate Spool
Finish : Black

Trieste Deck Mounted Single Handle Faucet with Hot/Cold Water Mixer

BathSelect® Manufacturer Warranty Information

2. Attach the provided braided water lines to the faucet until hand tight.
Juno Brushed Nickel Square Bathroom Vessel Sink Faucet

3. Remove the brass lock nuts from the mounting posts, and attach the threaded mounting posts to the faucet body using a Philips screwdriver. Set the brass lock nuts aside for now.
4. Set the faucet into its prepared mounting hole.
Juno Brushed Nickel Square Bathroom Vessel Sink Faucet

5. From below, slide the rubber washer onto the mounting posts followed by the metal washer. Hold in place.
6. Secure the faucet by reattaching the brass lock nuts that were removed in step 3. Hand tightens and adjust the faucet until it is properly aligned. Once aligned, use the provided basin wrench to finish tightening the locknuts.
Juno Brushed Nickel Square Bathroom Vessel Sink Faucet

7. Apply plumber’s tape or thread sealant to the threading on each braided water line. Attach the water lines to your main water supply. Ensure that you are connecting the hot and cold lines accordingly.
8. Once installation is complete, turn the main water supply back on from underneath your sink. Check for any leaks underneath.
9. Check to ensure that both cold and hot water running properly. Allow the water to flow for approximately 60 seconds to remove any dust or sediment within the waterlines.
Juno Brushed Nickel Square Bathroom Vessel Sink Faucet