How to Install Trialo Solid Brass Color Changing Water Powered Led Shower
Installation Instructions for Trialo Solid Brass Color Changing Water Powered Led Shower with Adjustable Body Jets and Digital Mixer
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
The Trialo Solid Brass Color Changing LED Rain Shower Head with Digital Mixer and 360° Adjustable Body Jets
Turn on the fun in your shower just by turning on the water, the LED lights will automatically light up and set the mood. They will even change colors automatically based on the water temperature. All this with no batteries, everything is self-powered by a built in dynamo that takes advantage of the water pressure to create the energy to light the bulbs.
Trialo Solid Brass Color Changing LED Rain Shower Head Features:
This high tech rain shower head powers the LED lights using a built in hidden dynamo
The lights will automatically turn on when water pressure is turned on
The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water and light
The shower head will automatically change colors according to the temperature of the water so you always know how the water will feel on your skin just by looking at it
Comes with solid brass mixer
Never be scalded again by entering a shower that is just too hot
The threading is universal so it will fit any standard shower head by simply unscrewing the old one by hand and attaching the new one.
No tools required, ½ connector fits standard sized shower plumbing.
1. Apply plumber's tape to the threads on both ends of the shower arm and slide on the decorative escutcheon.
2. Insert the new arm into the fitting in the ceiling and twist to tighten. Finish tightening with your adjustable wrench. Wrap a dry cloth around the shower arm to protect the finish while tightening with adjustable wrench.
3. Thread the new shower head onto the arm and hand-tighten. Hold the shower arm in place with groove joint pliers and finish tightening the shower head with your adjustable wrench. Wrap both in a dry cloth to protect the finish.
4. Before securing the decorative escutcheon, turn on the water supply to make sure that all connections are tight and there is no leaking. If no leaks are detected, continue with the installation. If leakage does occur, use your adjustable wrench to tighten the connections as necessary.
5. Apply a bead if silicone sealant to the back of the escutcheon and press firmly into place against the installation surface. Wipe away any excess sealant with your damp cloth.
