Home > Installation Instructions Recessed Stainless Steel Color Changing LED Rain Shower Head

Installation Instructions For Recessed Stainless Steel Color Changing LED Rain Shower Head

20 Inch Recessed Oil Rubbed Bronze Multi Color LED Rain Shower Head

Turn on the fun in your shower just by turning on the water, the LED lights will automatically light up and set the mood. They will even change colors automatically based on the water temperature. All this with no batteries, everything is self-powered by a built in dynamo that takes advantage of the water pressure to create the energy to light the bulbs.

Features:

  • This high tech rain shower head powers the LED lights using a built in hidden dynamo
  • The lights will automatically turn on when water pressure is turned on
  • The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water and light
  • The shower head will automatically change colors according to the temperature of the water so you always know how the water will feel on your skin just by looking at it
  • Never be scalded again by entering a shower that is just too hot
  • The shower head can be used with ceiling mount arm
  • Modern stylish design with a dark tone oil rubbed bronze finish made to match or stand out from your bathroom fixtures
  • High quality this modern shower head is made out of stainless steel, so it's made to last!
  • The flow rate is 2.5 GPM
24" Recessed Stainless Steel Color Changing LED Rain Shower Head Oil Rubbed Bronze finish
Showerhead Length 20"
Showerhead Width 14"
Material Stainless Steel
Finish Oil Rubbed Bronze finish
Showerhead Style Contemporary Rain Shower Head
Mount Method Recessed Ceiling Mount
Connection 1/2" US standard
BathSelect® Manufacturer Warranty Information
According to the dimensions and shape of the mounting bracket, determine the bracket location to be installed in the ceiling.

Showerhead lists :
  • Showerhead
  • 11.8" shower hose
  • Tee joint
  • Expansion bolt
  • G1/2" filter net
  • H4 inner hexagon



Attention

1. Open packages, check all the goods whether everything is ok.

2. Check the size of the connector and the thread size of the water pipes connector in the wall.

3. Clean the water pipes before installing them.

4. At least 2 water electricians to install the showerhead.

5. Pay attention to the water temperature, not over 70 degrees.

6. Water pressure: 0.05 MPA - 0.5 MPA.

7. Adapter is 100-265 V to 12 V, insurance device rated current less than 30 MA.



According to the four mounting holes on the mounting bracket, use Electric drill play mounting holes.
a) Through the two hexagonal nuts adjust the distance between the mounting bracket and the ceiling, and keep the mounting bracket on the level.
b) Use explosion screw fixed mounting bracket on the ceiling, pay attention to the explosion screw can adjust the height, and use level adjust the mounting bracket to level.


Connect 1 pcs water hose to 1 Tee Joints and G1/2, G1/2 joint in the middle, then put another side of the shower hose through the hole of shower head size.


Install the decorative panel, use SW4 hexagon wrench tighten 4 screws.



BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions