Installation Instructions for Petra LED Rainfall Shower Set in Chrome Finish
Petra LED Rainfall Shower Set in Chrome Finish
The Petra LED shower set includes everything needed in a modern bathroom: a rainfall showerhead, a handheld shower, and a shower faucet. They all come with a water-powered LED light system that requires no batteries or electrical connections, everything is self-powered by the water. The color of the lights varies depending on the water temperature, so you will never be taken by surprise again. Only the best materials have been used – the showerhead and shower faucet are made of brass, for a long-lasting lifetime. It comes complete with accessories and installation instructions. The built-in device generating electricity without any battery and no need for any other power. Just connect to water, LED will emit the light. When water flows down, the LED will light instantly and automatically as per water temperature.
Petra LED Rainfall Shower Set in Chrome Finish Features:
- Water pressure function: Massage, Saturating, and Bubbling Spray
- Self-powered by Water. No Battery nor Electricity needed.
- Stainless Steel Shower Hose Double Hooked Ø0.55"
- Anti-Twist Brass Conical Nut & Brass Hex Nut
- When the water temperature is ≤89 °F (≤32 °C), the Green color will show automatically;
- When the water temperature is between 97 to 107 °F (36-42 °C), the Blue color will show automatically;
- When the water temperature is between 109 to 122 °F ( 43-50 °C), Red color will show automatically;
- When the water temperature is above 122 °F (>50 °C), Red color will flash immediately.
- The flow rate is 2.5 GPM
- Shower Set Material: Brass
|
|
 
BathSelect® Manufacturer Warranty Information
- Before you begin, please read the installation instructions below. Observe all local building and safety codes.
- Unpack and inspect the product for any shipping damages. If you find damages, do not install.
- Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided
|
|
1. Brass Adapter
2. Faucet body
3. Washers
4. Diverter
5. Shower bar
6. Hand shower holder
7. Shower bar bracket
8. Shower bar
9. Mounting base
10. Decoration cover
11. Rain shower head
12. Handheld shower
Step 1: Connect the brass adapter provided to the water supply line.
Step 2: Adjust lever and distance to fit the faucet body.
Step 3: Turn the water valve on for a while to let the dust and impurities out.
Step 4: Assemble the shower set.
Step 5: Place a pre-assembled shower in the wall to find the proper position and then mark the mounting hole that needs to be drilled.
Step 6: Drill a hole for the upper part shower bar bracket, screw it.
Step 7: Place the decoration cover to the brass adapters.
Step 8: Install the pre-assembled shower to the connections.
Step 9: Connect shower hose, handheld shower, and rain shower head.
|
