Home > Installation Instructions for Arlon LED Widespread Waterfall Bathroom Sink Faucet

Installation Instructions for Arlon LED Widespread Waterfall Bathroom Sink Faucet

Arlon LED Widespread Waterfall Bathroom Sink Faucet


The polished chrome surface is beautifully finished and light combination makes it stand out in any modern environment. The LED are water activated, no need for batteries of electric supply. The colors change smoothly depending on the water temperature. The faucet body is made of solid brass and zinc alloy, the valve core material is ceramic, a combination that guarantees a long lasting lifetime. It comes complete with accessories and installation instructions.
Arlon LED Widespread Waterfall Bathroom Sink Faucet Description:
Type: Bathroom Sink Faucet
Feature: Waterfall, LED
Installation: Deck Mount
Faucet Mount: Single Hole
Number Of Handle: Single
Hot And Cold Water: Yes
Body Material: Brass, glass and zinc alloy
LED Power Supply: Water Power
LED Colour: Multicolor, blue, green, red
LED turns green between: 0-30 degrees
LED turns blue between: 30-40 degrees
LED turns red between: 40-50 degrees
LED starts to blink between: 50-80 degrees
Product Dimension: 15.75in x 7.87in x 3.94in
Arlon LED Widespread Waterfall Bathroom Sink Faucet



BathSelect® Manufacturer Warranty Information


Arlon LED Widespread Waterfall Bathroom Sink Faucet

INSTALLATION

Install the rough-in valve body behind the finished wall. Attach the valve body to wood blocking between two wall studs with wood screws. Be sure that the rough-in valve is completely level, and connect to the main water supply.

  1. When the wall around the rough-in valve is finished, install your faucet trim.
  2. If your faucet spout is not assembled, assemble by connecting the threaded outlet to the faucet body. If your spout is already assembled move on to the next step.
  3. If your faucet features a decorative faceplate, secure the faceplate to the wall with silicone sealant before installing your handle and spout trim pieces. Make sure that the faceplate is properly aligned over the rough-in valve and perfectly straight. If your faucet does not feature a faceplate move on to the next step.
  4. If the decorative spout escutcheon is not attached, place the escutcheon on the body of the spout and install the spout over the spout shank. Screw the spout into place and press the escutcheon firmly against the finished wall.
  5. Tighten any set screws in the spout with the Allen wrench.
  6. Install the handle(s) and any necessary hardware and tighten the set screws with your Allen wrench. If rubber O-rings or sealing gaskets are included, Place between the handle body and wall to create a watertight seal.
  7. When your faucet installation is complete, turn on the water supply. Check to make sure that all connections are tight (no water should be leaking) and that the hot and cold supplies are working correctly. Turn the water on and allow the water to flow through the spout for approximately 60 seconds. Allow the sealant to cure for 24 hours before use.

BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions