Installation Instructions for Acel Triple Handel Chrome Waterfall Sink & Bathtub Faucet Acel Triple Handle Chrome Waterfall Mixer Brass with Chrome Polished Finish FontanaShowers® This beautiful set combines the serenity of a waterfall with the beauty of chrome in this stunning faucet system. The polished chrome finish and the elegant curved structure of this waterfall faucet will complement any bathtub. Handheld shower provides additional coverage to your bathing experience. This has an elegant design and elevates the appeal of your decor made from the highest quality and for great tastes. The spout is manufactured from stainless steel to prevent rusting. Triple Handle Chrome Waterfall Sink/Bathtub Mixer BST-8020 Features: 5 Holes Chrome Waterfall Bathtub Faucet (Y-8020) Type:Bath & Shower Faucets Valve Core Material:Ceramic Bath & Shower Faucet Type:Deck-Mount B & S Faucets Surface Finish:Chrome Style:Contemporary Number of Handles:Triple Handle Surface Treatment:Polished Spout Material:Stainless steel(sus304) Suitable place:Bathtub Type:Waterfall Bathtub Faucet Valve Material:Brass Certificate:CE,ROHS Product Description: Chrome Widespread Waterfall Bathtub Faucet with Hot and Cold Switch Suitable Place: Bathroom Installation Type: Widespread Valve Type: Ceramic Valve Material :Brass Finish: Chrome Installation Holes Distance:Adjustable What's in the box 2011-12-6 A hand shower with 150cm (59.5") long stainless steel (sus304) soft hose (brass joint) A waterfall faucet with triple handles Cartridge: Lifetime >500, 000 times for both open and close Two 11.81" (30cm)-long and one 19.38" (50cm)-long stainless steel flexible hose. 1 x Installation Instruction Bath & Shower Faucet Type:Deck-Mount B & S Faucets Surface Finish:Chrome Style:Contemporary Number of Handles:Triple Handle Surface Treatment:Polished Working Pressure:0.1-2.0Mpa Flow rate : 1.3 GPM Spout Material:Stainless steel(sus304) Valve Material: Brass Suitable Place :Sink/Bathtub Installation Type: Widespread Valve Type:Ceramic Valve BathSelect® Manufacturer Warranty Information

INSTALLATION

Before you begin, read the installation instructions below. Observe all local building and safety codes.

Unpack and inspect for any shipping damages. If you find any damages, do not install. Contact Customer Service. If you need assistance while installing your shower system, call our Customer Service number.

We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures and plumbing.

TOOLS AND MATERIALS:

• Screwdriver
• Teflon Tape
• Adjustable Wrench
• Smooth Joint Pliers
• Soft Cloth
• Silicone Sealant

INSTRUCTIONS

INSTALLATION

Install the rough-in valve body behind the finished wall. Attach the valve body to wood blocking between two wall studs with wood screws. Be sure that the rough-in valve is completely level, and connect to the main water supply.

When the wall around the rough-in valve is finished, install your faucet trim.
If your faucet spout is not assembled, assemble by connecting the threaded outlet to the faucet body. If your spout is already assembled move on to the next step.
If your faucet features a decorative face plate, secure the face plate to the wall with silicone sealant before installing your handle and spout trim pieces. Make sure that the face plate is properly aligned over the rough-in valve and perfectly straight. If your faucet does not feature a face plate move on to the next step.
If the decorative spout escutcheon is not attached, place the escutcheon on the body of the spout and install the spout over the spout shank. Screw the spout into place and press the escutcheon firmly against the finished wall.
Tighten any set screws in the spout with the Allen wrench.
Install the handle(s) and any necessary hardware and tighten the set screws with your Allen wrench. If rubber O-rings or sealing gaskets are included, Place between the handle body and wall to create a water tight seal.
When your faucet installation is complete, turn on the water supply. Check to make sure that all connections are tight (no water should be leaking) and that the hot and cold supplies are working correctly. Turn the water on and allow the water to flow through the spout for approximately 60 seconds. Allow sealant to cure for 24 hours before use.