Home > Trialo Solid Brass Color Changing Water Powered Led Shower Installation Instruction

Installation Instruction For Trialo Solid Brass Color Changing Water Powered Led Shower



  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
  • Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided

    The Trialo Solid Brass Color Changing LED Rain Shower Head with Solid Brass Mixer and 360° Adjustable Body Jets

    Turn on the fun in your shower just by turning on the water, the LED lights will automatically light up and set the mood. They will even change colors automatically based on the water temperature. All this with no batteries, everything is self-powered by a built in dynamo that takes advantage of the water pressure to create the energy to light the bulbs.

    Shower Features:

    • This high tech rain shower head powers the LED lights using a built in hidden dynamo
    • The lights will automatically turn on when water pressure is turned on
    • The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water and light
    • The shower head will automatically change colors according to the temperature of the water so you always know how the water will feel on your skin just by looking at it
    • Comes with solid brass mixer
    • 6 Solid brass body sprays adjustable 360 degree
    • All parts are solid brass (no plastic parts!!!)
    • Never be scalded again by entering a shower that is just too hot
    • The threading is universal so it will fit any standard shower head by simply unscrewing the old one by hand and attaching the new one.
    • A shower arm is included.
    • The Shower head can be used with either wall or ceiling mount arm
    • Modern stylish design completely brushed stainless steel made to match or stand out from your other bathroom fixtures
    • High quality this modern shower head is made out of stainless steel, so it's made to last!
    • The flow rate is 2.5 GPM
    Trialo Solid Brass Color Changing Water Powered Led Shower with Adjustable Body Jets and Mixer
    High Quality

    Technical Specs

    Material Solid Brass
    Finish Polished Chrome
    Style Contemporary Rain Showerhead
    Showerhead Height (thickness) 0.33
    Showerhead Width Available in 8", 10", 12", or 16"
    Showerhead Length Available in 8", 10", 12", or 16"
    LED Power Source Water Flow
    LED Color Blue, Green, Red
    Showerhead Style Contemporary Rain Shower
    Mount Method Wall or Ceiling Mount
    Connection 1/2" US standard (included)
    Shower Arm Included
    Body Jets Comes with solid brass 360° adjustable Body Jets
    BathSelect® Manufacturer Warranty Information
    Trialo Solid Brass Color Changing Water Powered Led Shower Installation Instructions



Trialo Solid Brass Color Changing Water Powered Led Shower with Adjustable Body Jets and Mixer

Shower Head Installation






Shower Mixer Installation





Shower Body Jet Installation


1. Set the decorative cover on the body jet.

2. Roll the raw material belt in the thread screws.

3. Use a wrench to tighten 6 body jets on the water outlet holes in a clockwise direction.




Body Jet Installations

Hand-Held Shower Instructions






5. HOLE LOCATIONS FOR WALL MOUNT

Remove Front Cover (5A) from Wall Mount (5B). Use Wall Mount Screw Holes (5C) to place the desired location. Using a punch or awl, tap the screw hole locations. Holes must be vertically aligned.


6. ANCHOR INSTALLATION

Drill two 1/4” dia. Holes (6A). If installing into a studs drill two 1/8” dia. holes and do not use Anchors (6B). Insert Anchors (6B) into Holes (6A) and tap flush with the wall.


7. WALL MOUNT INSTALLATION

Place Wall Mount (7A) into wall and inset Mounting Screws (7B) through Wall Mount Holes (7C) and tighten until Wall Mount (7A) is flush with the wall. Do Not Over Tighten! Insert Front Cover (7D) into Wall Mount (7A)


8. DROP ELBOW & HOSE INSTALLATION

Apply PTFE plumbers tape on both ends of Pipe Nipple (8A) (not included). Screw Pipe Nipple (8A) into the elbow inside the wall. The Pipe Nipple (8A) is to project 1/4” – 3/4” from the finished wall. Screw Drop Elbow (8B) onto Pipe Nipple (8A) and tighten until Drop Elbow (8B) is property positioned and flush to the finished wall.

Place Rubber Seal (8C) inside Hex Hose Fitting (8D). Connect Hex Hose Fitting (8D) into Drop Elbow Outlet (8E) by turning Hex Hose Fitting (8D).


9. UNIT STARTUP

Turn on hot and cold water supplies, and check all connections for leaks.


10. FINAL FLUSHING

For final flushing, turn the valve on and allow water to run through the Hose (10A) for several minutes. Allow water to run for several minutes until all foreign matter clears the line.


11. SHOWER ARM INSTALLATION

Place Rubber Seal (11A) inside Tapered Hose Fitting (11B). Conned Hand Shower (11C) to Hose (11D) by turning Tapered Hose Fitting (118) clockwise.

BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions