Home > Polished Chrome Bathroom Faucet wall mount Installation Instruction

Installation Instructions for Polished Chrome Bathroom Faucet wall mount Modern design meets understated appearance in this wide spout waterfall faucet

Ideal for your bathroom. Ceramic core & brass valve materials provide durability with a sleek polished chrome finish. Independent hot and cold nozzles included. Wall mounted. This has an elegant design and elevates the appeal of your decor made from the highest quality and for great tastes. When it comes to new upgrades, we are offering shape, finish and styles you're looking for.

Polished Chrome Bathroom Faucet wall mount Features:

Type : Wall Mount Faucet
Cold/Hot Water Control Type : Dual Holder Dual Control
Number of Handles : Dual Handles
Bath & Shower Faucet Type : In-Wall B & S Faucets
Valve Core Material : Ceramic
Type : Fixed Support Type
Surface Treatment : Polished
Surface Finish : Chrome
Style : Contemporary
Installation Type : Wall Mount
Size : 131-200mm (5.15"-7.87")
Flow Rate : 1.0 GPM
Polished Chrome Bathroom Faucet wall mount


Polished Chrome Bathroom Faucet wall mount
Polished Chrome Bathroom Faucet wall mountPolished Chrome Bathroom Faucet wall mountPolished Chrome Bathroom Faucet wall mount
BathSelect® Manufacturer Warranty Information

Faucet Installation Instructions

Anacona Dual Handle Solid Brass Bathroom Sink Faucet

Before installing, read entire Widespread Faucet Installation Instructions. Observe all local building and safety codes.

For the following Installation Instructions for your new Widespread Faucet it is assumed that any old fixtures have been removed and any repairs or modifications to the water supply have been completed.

Unpack and inspect the product for any shipping damages. If you find damages. If you find damages, do not install. Contact Customer Service . If you need assistance or have questions while installing your Widespread Faucet, contact Customer Service.

We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures.

TOOLS AND MATERIALS:

  • Adjustable Wrench
  • Silicone Sealant
  • Damp Cloth

INSTALLATION

Install the rough-in valve body behind the finished wall. Attach the valve body to wood blocking between two wall studs with wood screws. Be sure that the rough-in valve is completely level, and connect to the main water supply.

  1. When the wall around the rough-in valve is finished, install your faucet trim.
  2. If your faucet spout is not assembled, assemble by connecting the threaded outlet to the faucet body. If your spout is already assembled move on to the next step.
  3. If your faucet features a decorative face plate, secure the face plate to the wall with silicone sealant before installing your handle and spout trim pieces. Make sure that the face plate is properly aligned over the rough-in valve and perfectly straight. If your faucet does not feature a face plate move on to the next step.
  4. If the decorative spout escutcheon is not attached, place the escutcheon on the body of the spout and install the spout over the spout shank. Screw the spout into place and press the escutcheon firmly against the finished wall.
  5. Tighten any set screws in the spout with the Allen wrench.
  6. Install the handle(s) and any necessary hardware and tighten the set screws with your Allen wrench. If rubber O-rings or sealing gaskets are included, Place between the handle body and wall to create a water tight seal.
  7. When your faucet installation is complete, turn on the water supply. Check to make sure that all connections are tight (no water should be leaking) and that the hot and cold supplies are working correctly. Turn the water on and allow the water to flow through the spout for approximately 60 seconds. Allow sealant to cure for 24 hours before use.

BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions