Home > Installation Instruction For Milan Juno 24"LED Rain Shower Head Thermostatic Shower Valve Set

Installation Instructions


Head Shower Installation

Decorative cover
Screws
Pipe 1
Pipe 2
Screw
Bolt
Nut
Water Inlet Pipe


hole size on ceiling

1. Drawing the line on the ceiling according to the above specification
Decorative Cover
pipe 1

2. connect pipe 1 with decorative cover


3. Drill the holes on the ceiling according to the above hole specification and install 4 pipes.
4. According to the right drawing, install four-pipe 2 into pipe 1. Put the screw bolts through the hole on the side to lock pipe 2 with pipe 1.

5. As the right drawing is shown, install four-pipe 2 on the head shower.

6. After fixing the showerhead on the ceiling, connect the shower hose with 2 water inlet on the showerhead back cover. The other end connects with the water outlet pipe in the wall.





Remarks: Ceiling mounted shower head come with fixing bar installation

1. Draw size on ceiling

2. Install fixing bar on ceiling

3. Install fixing bar on shower head


4. Put shower head bar on ceiling fixing bar.

The showerhead installation is now complete.

Bathselect 20″ Large Shower head with 3 Way Mixer & HandshowerBathselect 20″ Large Shower head with 3 Way Mixer & HandshowerBathselect 20″ Large Shower head with 3 Way Mixer & HandshowerBathselect 20″ Large Shower head with 3 Way Mixer & HandshowerBathselect 20″ Large Shower head with 3 Way Mixer & HandshowerBathselect 20″ Large Shower head with 3 Way Mixer & HandshowerBathselect 20″ Large Shower head with 3 Way Mixer & HandshowerBathselect 20″ Large Shower head with 3 Way Mixer & HandshowerBathselect 20″ Large Shower head with 3 Way Mixer & HandshowerBathselect 20″ Large Shower head with 3 Way Mixer & HandshowerBathselect 20″ Large Shower head with 3 Way Mixer & HandshowerBathselect 20″ Large Shower head with 3 Way Mixer & Handshower