Home > Installation Instruction For Briano MultiColor Water Powered Shower Solid Brass Built in Mixer
Installation Instructions for Briano MultiColor Water Powered Shower












Briano MultiColor Water Powered Shower Solid Brass Built in Mixer
  • Before you begin, read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the product for any shipping damages. If you find damages, do not install it. If you need assistance or have questions while installing your shower set, contact Customer Service.
  • We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures, and plumbing.











1. Install the valve body. Wrap the threaded portion of the joints in Teflon tape and connect the water inlet and outlet.

2. Put the protective cover on the valve body and finish the shower wall.

3. When the finished wall is complete, remove the protective cover.

4. Install the escutcheon, and handle. Tighten the set screw with an Allen wrench to secure.

5. Attach the shower arm escutcheon to the shower arm. Wrap the threaded portions of the shower arm with Teflon tape and connect the arm to the shower inlet. Adjust the direction of the water flow as needed. Attach the rainfall shower head to the shower arm