The BathSelect Freestanding Waterfall Style Faucet Installation BathSelect Freestanding Waterfall Style Faucet With Curved Spout And Water Mixer In Chrome Finish This BathSelect freestanding bathroom sink faucet is a perfect match for contemporary style bathrooms. Our brass bathroom faucet is representative for this faucet style, and it can successfully recreate the feel of that era. Our sink faucet is the ideal choice for those who aim to create a unique bathroom design. It is a waterfall style faucet with a graciously curved spout, in polished and brushed finish. It has two separate handles for hot and cold water and built-in water mixer. The installation is easy, deck mount, three holes required. Only the best quality materials have been used – the body and spout are made of solid brass, while the valve core material is ceramic, for a long lasting life time.This stylish and contemporary styling of this faucet is the perfect solution for updating your existing bathroom sink hardware. This faucet has been made with premium grade lightweight. Besides it is specially equipped with drip-free ceramic valves for long life and smooth feel. It comes complete with accessories and installation instructions. Waterfall Style Faucet With Curved Spout And Water Mixer In Chrome Finish Features: Brand Name : BathSelect Style : Contemporary Model Number: BS9088 Type: Waterfall faucet Installation Type : Deck mount Hot and cold water : Yes Top faucet: One hole Style : Double handle, single hole Valve core material : Ceramic Surface treatment : Chrome Feature : Ceramic spool plate Faucet Style : Waterfall Usage : Bathroom mixer faucet Hot and cold water : Yes Body material : Brass BathSelect® Manufacturer Warranty Information

INSTALLATION INSTRUCTIONS

Before installing, read entire Wall Mount Faucet Installation Instructions. Observe all local building and safety codes.

For the following The your new Wall-Mount Faucet it is assumed that any old fixtures have been removed and the water supply lines have been relocated to the proper installation location.

TOOLS AND MATERIALS:

• Allen Wrench (provided)
• Drill
• Level
• Wood Screws
• Silicone Sealant

INSTALLATION

1. Install the rough-in valve body behind the finished wall. Attach the valve body to wood blocking between two wall studs with wood screws. Be sure that the rough-in valve is completely level, and connect to the main water supply.

2. When the wall around the rough-in valve is finished, install your faucet trim.

3. If your faucet spout is not assembled, assemble by connecting the threaded outlet to the faucet body. If your spout is already assembled move on to the next step.

4. If your faucet features a decorative face plate, secure the face plate to the wall with silicone sealant before installing your handle and spout trim pieces. Make sure that the face plate is properly aligned over the rough-in valve and perfectly straight. If your faucet does not feature a face plate move on to the next step.

5. If the decorative spout escutcheon is not attached, place the escutcheon on the body of the spout and install the spout over the spout shank. Screw the spout into place and press the escutcheon firmly against the finished wall.

6. Tighten any set screws in the spout with the Allen wrench.

7. Install the handle(s) and any necessary hardware and tighten the set screws with your Allen wrench. If rubber O-rings or sealing gaskets are included, place between the handle body and wall to create a water tight seal.

8. When your faucet installation is complete, turn on the water supply. Check to make sure that all connections are tight (no water should be leaking) and that the hot and cold supplies are working correctly. Turn the water on and allow the water to flow through the spout for approximately 60 seconds. Allow sealant to cure for 24 hours before use. Allen Wrench (provided) Drill Level Wood Screws Silicone Sealant