How to Install BathSelect® Stainless Steel Electric Heating Wall Mount Towel Warmer In Dark Oil Rubbed Bronze Finish | BS9899
This BathSelect® stainless steel wall mount towel warmer is as simple as plugging into standard electrical outlet. This wall mount heated towel warmer rack will safely, quickly and evenly warm large thick towels and bathrobes, as well as washed clothes and hand towels. Stylishly crafted and rust resistant stainless steel for reliability and functionality. Dark oil rubbed bronze finish allows for easy cleaning. You can put various items from towels to robes in bars and provide convenience. It will definitely be useful to keep a space clean and for your daily life. The towel warmer is a perfect towel-heating solution for homes. This is a wall-mount towel warmer. It’s design maximizes the space of your wall space. Its modern style makes it suitable for your home, hotel, spa and even outdoor areas with water protection.Not only a perfect towel heater, but also a wonderful bathroom decoration. This towel warmer rack’s design can be easily mount to any bathroom wall. Its features a green energy efficient which is powerful enough to warm your towels within a few minutes.
| |  | | |
|
| | | | Features: | | Visit Product Page  | - Type : Towel racks
- Model Number : BS9876
- Material : Stainless steel
- Features: Electric heating
- Installation: Wall mount
- Surface finish : Dark oil rubbed bronze
- Style : Contemporary
- Towel rail type : Fixed bath towel holder
- Is customized : Yes
| sensor | 
|
Important Note:
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the products for any shipping damages. If you find damages, do not install.
Please note all products must be installed by a professional and certified plumber otherwise warranty may be voided.
|
|
Automatic Soap Dispenser Installation Instructions
|
Size
|
Towel warmer
|
|
|
|
|
|
|
|
|
|
Step 1:
|
|
Step 2:
|
|
|
|
|
Step 3:
|
Towel warmer
|
Step 4:
|
|
|
|
|
Name: Electric Heated Towel Rack
Material: Low carbon steel
Voltage: AC220
Color: White, Black
Power: 400 W
Waterproof: IPX4
Product size:
Height: 700mm
Width: 400mm (Suitable for 3-5 square bathroom heating)
Select the appropriate installation location, determine the installation direction of the towel rack according to the installation card, attach the installation card to the wall surface, select the installation hole position according to the model of the product you need to install, and drill 4 holes respectively with the impact drill (hole depth can be depending on the length of the wall plug or the length of the screw, it can be customized)
1. Insert the wall plug into the hole in the direction indicated by the arrow in the figure, flush with the wall
2. Pass the screw through the center hole of the horseshoe and fix it on the wall plug.
3. Install the four support feet of the towel rack on the horseshoe, and tighten the screws on the four feet
of the rack with the hex wrench to make it completely fastened to the wall.
4. Installation is complete
|
|
|
|
|
|
