How to Install Brushed Nickel Bathroom Wall Mount Solid Brass Two Ways Shower Head | BS67GH
Wall Mount Shower Head & Mixer
Available in Brushed Nickel finish, the wall mounts two ways showerhead features rainfall and does not cost you much. Although this version of the BathSelect showerhead does not include a slide bar, yet it ensures your comfort and serenity while you take a shower. Solid in nature, the showerhead in brass finish.
Features:
Brand Name: BathSelect
Model Number: BS67GH
Type : Shower Sets
Cold/Hot Water Control Type : Single Holder Dual Control
Size : 15.7" (400mm)
Style : Contemporary
Number of Handles : Single Handles
Surface Treatment : Brushed
Exposed Shower Faucet Feature : With Slide Bar
Type : Fixed Rotatable Type
Valve Core Material : Ceramic
Surface Finish : Brushed Nickel
Bath & Shower Faucet Type : Exposed Shower
Feature: Cold and Hot
Installation Type : Wall Mount
shower
Important Note:
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified pumber otherwise warranty might be voided.
Shower Head Installation Instructions
Size:
Step 1:
shower
head
Step 2:
Open the top cover and drill according to the marked position. 1. Mark by the position of the four holes. 2. Take care to avoid wires and pipes to prevent damage. 3. Be sure to confirm that the four holes are on the same horizontal line.
Remove the protective cover (F). Mark the positions and drill holes to suit the anchors (A). Install the anchors (A) and fix the rough-in valve (B) into the wall with screws. Use a level to ensure that the rough-in valve (B) is straight and level. (Important: Flush the water supply to remove any dirt and debris before installing the valve body).
Shower Head Installation Instructions
Step 3:
Step 4:
Wrap Teflon tape around the pipe threads and connect water supply lines and in-wall pipes (not included) as desired to the rough-in valve (B). Turn on the water supply and open the cartridge to check for leakage. Then put on the protective cover and finish the wall surrounding the valve. (Note: Test the water pressure after the pipe connections have been made and before the finished wall material is installed).
Two inlet fittings are connected to the pipe joint of the wall; then the nut, expansion screw, and inlet pipe are connected.
Shower Head Installation Instructions
Step 5:
Step 6:
Reinstall the top cover.
Fix the escutcheon (D) to the showerhead (E) with screws (C).
Shower Head Installation Instructions
Step 7:
Step 8:
Remove the protective cover when the finished wall is completed. Then, install the showerhead (E) and press it against the finished wall.
Shower Mixer Installation Instructions
Step 1:
sensor
installation
Step 2:
Step 3:
Showerhead size: 21.6 " x 9"
Valve type: ceramic valve
Faucet body material: brass
Connection size: G1/2"
2 ways mixer
Rainfall and waterfall runs separately
The LED will light when the water flow and the color will change when the water temperature.
