Home > Installation Instructions for Benete Square Chrome Rain Shower System Faucet Set 2 Outlets Ceiling Head & Handset

How to Install Benete Square Chrome Rain Shower System Faucet Set 2 Outlets Ceiling Head & Handset | BZ-5636


Rainfall Shower System - Multiple sizes available

Add a touch of contemporary style to your bathroom with the Benete shower system comes complete with the triple thermostatic shower valve, different sizes of shower head with arm and the slide rail kit with handset. With a solid brass construction for long lasting durability, the solid brass thermostatic shower valve features a built-in anti-scald device for a safer showering experience, as well as ceramic disc technology for smooth and precise control.

Features:
  • Solid brass rough-in valve
  • Made in Great Britain
  • Serviceable check valves and strainers
  • Ceramic Disc Technology
  • Pre-set maximum temperature 104º F
  • Automatic anti scald device
  • The recommended pressure for best performance 2 to 75 psi
  • ½" NPT Inlets and Outlets Compatible with standard US plumbing connections
  • The flow rate is 2.5 GPM
  • Includes 6" ceiling mount arm
  • Recommended Water Pressure: 14.5 psi
  • Minimum Water Pressure: 7.25 psi
  • Maximum Water Pressure: 72.5 psi
shower Benete Square Chrome Rain Shower System Faucet Set 2 Outlets Ceiling Head & Handset


Important Note:

  • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
  • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
  • Please note all showers must be installed by a professional and certified plumber otherwise warranty may be voided.

  • Shower Head Installation Instructions

    Step 1: Step 2:
    shower
    installation
    Step 3: Step 4:
    Step 5: Step 6:

    Maximum Flow Rate: 2.5 GPM

    Step 1: Take Out the Old Shower Head
    You can easily remove it by hand, but depending on how long the rain showerhead has been installed, you might need to use an adjustable wrench. Hence, if you find it difficult to remove, rotate the showerhead with an adjustable wrench in a counterclockwise direction to unscrew it.

    Step 2: Keep the Shower Arm Clean and In Good Shape
    After you have removed the head, check the shower arm threads for any debris and old Teflon tape. If you find any, remove it and clean them off thoroughly. It’s best to use a microfiber cloth when cleaning the thread because it removes Teflon tape perfectly and works great to pick up tiny grits.
    Once you’re done cleaning, check if it is corroded or leaking. For damaged threads, it will be best you replace it entirely so you can have a comfortable shower experience any time.

    Step 3: Time to Add New Teflon Tape
    Since you have removed the old Teflon tape, you have to replace it with new ones. The reason is that this tape helps to protect the shower from leaking after installing the showerhead. Now apply the new Teflon tape about 3-5 turns on the thread and tear the end part. Use your hands to smooth it out to keep it leveled to the thread. Keep in mind that when applying the tape, you should go in a clockwise motion so that it doesn’t come off when you attach the head in the same direction.

    Step 4: Connect the Showerhead
    As said earlier in the tools needed, we’re using the rubber sealing washer that comes with the showerhead. This tool helps to make the showerhead stay watertight and secured on to the thread. Ensure you place it properly before installing it.
    After that, reconnect the shower head and tighten it down with your hands. You can employ a chair or ladder to make things easier for you.

    Step 5: Tighten the Showerhead
    On To the Thread You will need to get the adjustable wrench handy to tighten down the shower very well. But make sure you wrap the threads with a terry cloth, so it doesn’t damage the finish when tightening the showerhead.
    Once you have done that, now use the adjustable wrench to tighten down the showerhead. However, don’t over-tight or force it so that it’s easier to remove in the future.


    Hand Held Shower Installation Instructions


    Parts Included:

    1. Wall Outlet
    2. 60" Shower Hose with Gaskets
    3. Complete Slide Bar with Mounting Parts / Posts, Screws & Anchors
    4. Adjustable Shower Mount (attached to slide Bar)
    5. Hand Held Shower










    HandHeld Shower Installation Instructions handshower
    installation instructions
    Supply Elbow Installation Wall Bar Installation
    Step 1: Step 2:
    BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions
    Skip to content