BathSelect Premium Kitchen & Bath Products Specification Driven High Performance Interiors
Premium kitchen and bath design is no longer about looks alone. For architects, engineers, interior designers, contractors, developers, and owners of facilities, the choice of fixtures is at the intersection of water performance, accessibility, user experience, maintainability, construction coordination and long-term asset value.
Read MoreShow Less
Architectural faucets, touchless restroom systems, kitchen fixtures, luxury showers, vanities, sinks and coordinated finish families for residential, hospitality, workplace, retail and institutional environments are part of the product portfolio that BathSelect offers to meet this broader AEC need.
Design continuity is where the value of a premium fixture package begins.
A project may call for a sculptural kitchen tap in a private home, sensor-operated fixtures in a public washroom or a multi-outlet shower system in a hotel suite. Specifiers can view BathSelect’s premium luxury shower systems, designer shower sets for hospitality bathrooms, commercial sensor faucets and brushed-nickel kitchen faucets as coordinated design resources, not isolated decorative purchases.
Read MoreShow Less
BathSelect’s shower collections include rainfall heads, body jets, handheld outlets and digital control options, while the kitchen category features pull-down, touch-activated and sensor-operated models.
Other AEC Performance Criteria besides Finish Selection
A review of an AEC-grade fixture should include design intent in measurable requirements. The basis-of-design schedule shall identify:
Read MoreShow Less
Mounting configuration and rough-in
Valve and temperature control strategy
Required operating pressure and flow rate
Sensor range and shutdown behaviour
Hardwired or hybrid power battery
Material and architectural finish
Access to service requirements
Availability of spare parts
Test Reports & Certifications Applicable
In addition, teams should coordinate outlet quantity, probable simultaneous demand, pressure balance, thermostatic control, waterproofing interfaces, structural blocking, ceiling geometry, drainage capacity, and access-panel locations for shower systems.
Water performance requires special care. According to the EPA, products with the WaterSense label have been independently certified to use at least 20 percent less water while performing as well or better than standard products. EPA’s current technical guidance recommends a maximum flow of 1.5 gallons per minute at 60 psi for WaterSense-labeled bathroom sink faucets . These values are to be used as checkpoints for specification and not assumed product attributes. Be sure to check the certification, flow data and pressure requirements for the specific BathSelect model you are looking at. See the EPA WaterSense product specifications.
Inclusive Fixtures and Accessibility Coordination
Accessibility should be evaluated at the level of assembly and installation. The 2010 ADA Standards for Accessible Design set minimum scoping and technical requirements for covered public, commercial and government facilities.
Read MoreShow Less
A compliant lavatory condition includes more than the tap. The final installation is affected by reach ranges, clear floor space, knee and toe clearance, counter height, washbasin depth, operable parts, mirror placement and pipe protection.
Sensor activation can reduce the need for grip force or manual operating force but the architect still has to check detection behaviour, user placement, basin form and reachable controls. Product descriptions that include terms like “ADA,” “accessible,” or “commercial compliant” shall be supported by project-specific documentation and shall be checked against the governing code and authority having jurisdiction.
Touchless Systems for Commercial Projects
BathSelect touchless faucets and automatic soap dispensers are ideal for high traffic environments such as airports, healthcare facilities, universities, offices, restaurants, hotels, stadiums and more. The collection includes coordinated faucet-and-dispenser systems, a variety of mounting configurations, different finishes and battery, hardwired or hybrid power options.
Read MoreShow Less
A good commercial spec shouldn’t just read, “provide sensor tap.” It should define the sensing method, detection zone, timeout logic, solenoid accessibility, mixing arrangement, power source, vandal resistance, shutoff location, refill access, and acceptable replacement parts.
When fittings are paired with reflective basins, dark finishes, shallow bowls or strong ambient lighting, mock-up testing is advised. The actual washbasin must be taken into account, as spout projection, backsplash location, basin reflectivity and hand placement can all influence activation and splash control.
Premium Shower and Kitchen Co-ordination
Luxury shower systems bring hydraulic and spatial complexity. Rain heads, body jets, hand showers, tub fillers and digital or thermostatic controls all must be coordinated with available pressure, hot-water capacity, pipe sizing, drainage, structural support, waterproofing and service access.
Read MoreShow Less
A multi-outlet composition that appears dramatic may fall flat when the plumbing system is not designed for likely simultaneous demand. Early collaboration between the architect, plumbing engineer, interior designer, installer, commissioning team and supplier ensures performance and design intent.
The functional profile of kitchen faucets is different. Verify pull down reach, swivel range, handle clearance, washbasin depth, deck thickness, backsplash interference and hose routing prior to approval. Submittals shall include type of cartridge, access to aerator, supply connections, procedures for replacing spray head, finish care requirements, power requirements for electronic models and clearances around adjacent millwork.
Example AEC Case: 140-Key Boutique Hotel
| Evaluation criterion | Weight | Example Score |
|---|---|---|
| Design and coordination of finish | 20% | 18 |
| Hydraulic and functional performance | 25% | 22 |
| Accessibility and user operation | 15% | 14 |
| Serviceability and parts access | 20% | 16 |
| Documentation of water efficiency | 10% | 8% |
| Submittal completeness and leadtime | 10% | 9 |
This chart is an example of project control and not a published BathSelect product rating. It shows how premium fixtures can be evaluated on objective AEC criteria, rather than on looks or first cost alone.
Read MoreShow Less
Prior to release for construction, the team reviews finish samples, rough-in drawings, installation instructions, flow data, valve requirements, control compatibility, replacement parts and maintenance documentation.
Submission, Specification and Procurement Strategy
All selected products should be linked to a fixture schedule, room type and drawing designation for Division 22 coordination. Basis-of-design language should be separated from mandatory performance criteria in specifications so that proposed substitutions can be evaluated fairly.
Read MoreShow Less
Submittal packages shall include dimensions, connection sizes, operating-pressure limits, flow rates, electrical requirements, finish samples, installation instructions, certifications where claimed, warranty information and spare-parts schedules.
Procurement planning should consider finish-lot consistency, attic stock, approved mockups, phased delivery and long-lead concealed components. Often, exposed trim can be replaced with minimal disturbance, but inaccessible valves, power supplies, and rough-in bodies are far more difficult to repair once enclosed.
Premium products with technical responsibility behind them
BathSelect premium kitchen and bath products, when paired with disciplined technical review for product selection, can support design-led residential, hospitality, wellness and commercial projects.
The best outcome for AEC teams is more than just a beautiful fixture. It is an architectural fixture that is consistent with the architectural condition, works with the engineered system, supports accessible use, can be efficiently maintained, and sustains the intended experience throughout the life cycle of the building.
It is that blend of design character, coordinated product selection, documented performance and technical accountability that makes a premium kitchen or bath fixture a valuable AEC asset.
BathSelect Premium Kitchen & Bath Products Specification Driven High Performance Interiors
Read MoreShow Less
It is that blend of design character, coordinated product selection, documented performance and technical accountability that makes a premium kitchen or bath fixture a valuable AEC asset.
